- Digital Peripheral Solutions Security Camera User Manual

QSTC201/211 IP-CAMERA USER MANUAL

5.2.3 SD Card

Setup steps:

1. Enter into "system configuration" –“Date & Time” refer to Figure 5-3:

2. Usage status: Blue pane means used; red pane means unused.

3. Pressing "Eject card" terminates writing data to SD card, then it can be

ejected safely.

Note: Use of the SD card function should be coordinated with Motion alarm

and Sensor alarm, when alarm is triggered (refer to 5.3 Alarm configuration

for details), pictures can be stored on the SD card.

Fig 5-3 system configuration—SD card interface

5.3 Channel configuration

Channel Configuration includes four submenus: basic configuration, image

configuration, and network image configuration

5.3.1 Basic configuration

Setting steps:

1. Enter into "Channel configuration"-- "Basic configuration" refer to Figure 5-4:

1. Select the channel to be setup on the "Channel Number" pull down list.

2. Input the channel name in the "Channel Name" textbox.

3. Check “time stamp", to display the record time on the video.

4.Use "Position" to position the record time: upper left, lower left, upper right,

lower right.