- Digital Peripheral Solutions Security Camera User Manual

QSTC201/211 IP-CAMERA USER MANUAL

5.5.2 IP configuration

1. Enter into "Network configuration"--"IP configuration", refer to Figure 5-15:

There are three Options for setup IP: Static IP, dynamic IP and PPPOE.

2. Static IP: users manually input the IP address, subnet mask, gateway and

DNS.

3. Dynamic IP: router will distribute IP address to device automatically.

4. PPPOE: users manually input the user name and password for the network

connection that they get from their internet service provider.

5. Select the “Enable notifying change of IP”, an email will send to the appointed

mailbox automatically when Device’s IP address is changed.

6. Press the "Save" button to save the settings.

Note: If using dynamic IP address, user should search the wireless IP

address by wireless networking PC.

Fig 5-15 network configuration-- IP configuration interface