User Guide

ManualsBrandsQ-See ManualsAutomobile PartsQSTD5304

Q-See is a registered trademark of Digital Peripheral Solutions, Inc.

Digital Peripheral Solutions, Inc.

8015 East Crystal Drive,

Anaheim, CA 92807

www.Q-See.com

Quick Start Guide

Setup

Connect

Enjoy

Quick Start Guide – Remote Internet Monitoring

4 Channel DVR

For Models: QSTD5304

QSDF8204

QSD2304L

Remote Internet Monitoring

Softw are Setu p

Remote Playback

Remote DVR C onfiguration

Remote P TZ

Large Picture

DVR RecordQuad Picture Next Video Channel S nap PictureCamera A udio

Summary of content (6 pages)

PAGE 1
Quick Start Guide Quick Start Guide – Remote Internet Monitoring 4 Channel DVR For Models: QSTD5304 QSDF8204 QSD2304L 1 Setup 2 Connect 3 Enjoy Remote Internet Monitoring L o g in S o ftw a re S e tu p R e m o te Pla yb a ck R e m o te DV R Co n fig u ra tio n R e m o te P TZ Digital Peripheral Solutions, Inc. 8015 East Crystal Drive, Anaheim, CA 92807 www.Q-See.com Q-See is a registered trademark of Digital Peripheral Solutions, Inc.
PAGE 2
1 Setup B A Remote Monitoring Setup for DVR using DHCP to setup IP address Accessing the DVR from a single router: To access the DVR from a computer that is using the same router as the DVR, set up the network settings using either the DHCP option or assigning a static IP address: To Setup DHCP (Most common routers are DHCP) 1. To assign an IP address to the DVR using DHCP, select the Menu Key on the DVR to access the Main Menu.
PAGE 3
2 Connect C Attaching the DVR directly to DSL/Cable modem PPPOE: Select the PPPOE option in the IP config options. To access the IP config window: Push the Menu Key on the DVR to prompt the Main Menu. Use the Direction Keys to select the Network option and push Enter to display the Network Screen, select the IP Config option and select Enter to display the IP Config Window. A To access the DVR from a remote computer over the internet via internet browser (Internet Explorer).
PAGE 4
B Accessing the DVR through a static or dynamic IP address *Dynamic IP address can change from time to time depending on your Internet Service Provider. 1 If the Dynamic IP address changes, you can find the new IP address by going to www.myipaddress.com on a computer that is attached to the same router as the DVR. 2 Two options: a) Get a static IP address from your Internet Service Provider. b) Use a dynamic domain name instead of IP address. 3 Dynamic domain name: Go to www.no-ip.com or www.dyndns.
PAGE 5
D 3 Enjoy Remote Viewing Window When you connect you will see the remote viewing window shown below: CONGRATULATIONS on your purchase! This Q-See product has undergone extensive quality control. If you have any issues during the setup process, please contact our support department before returning the product.
PAGE 6
Quick Reference Notes: Page 9