Installation Guide

SearchSearchDeleteDeleteSetupSetupAddAdd ApplyApply ExitExit
DEVICE MANAGEMENTDEVICE MANAGEMENT
CHCH Device Net Address Manufacturer StatusProduct ModelManufacturer StatusProduct ModelDevice Net Address
1/11/1
1 10.151.151.100
Q-See 9322M_ONVIF Connected
None 192.158.0.140 ONVIF ONVIF Disable
1 10.151.151.100 Q-See 9322M_ONVIF Connected
None 192.158.0.140 ONVIF ONVIF Disable
PICTURE 8
STEP 10
Select the camera (it will highlight in blue)
in the Device Management window. It will
show “Disable” in the Status column on
the left. (picture 8)
STEP 11
Click Setup at the bottom of the window.
(picture 9)
PICTURE 9
PICTURE 11
OKOK CancelCancel
MODIFY DEVICEMODIFY DEVICE
Enable
Channel
Manufacturer
IP Address
Server Port
User Name
Password
Enable
Channel
Manufacturer
IP Address
Server Port
User Name
Password
11
Q-SeeQ-See
11
PICTURE 10
OKOK CancelCancel
MODIFY DEVICEMODIFY DEVICE
Enable
Channel
Manufacturer
IP Address
Server Port
User Name
Password
Enable
Channel
Manufacturer
IP Address
Server Port
User Name
Password
11
Q-SeeQ-See
11
STEP 12
Make sure that the Enable box is
checked. (picture 10)
STEP 13
Enter the User Name and Password for
the camera. (picture 10) This information
is found in the camera’s manual.
STEP 14
Click OK.
You should now see video from that
camera.
NOTE: Q-See’s QTN-series cameras will automatically display video in
the first available channel. Other brands or series cameras keep the
following in mind:
• The camera will need to have DHCP enabled
• The camera will need to be ONVIF compliant
• Q-See cannot guarantee that all third party cameras will be
compatible, or that all features (motion detection, recording, etc.) will
operate normally.
• Consult your camera’s manual for assistance with any of these points.
PICTURE 7
STEP 8
Select one or more cameras by checking
the box(es) to the left. (picture 7)
STEP 9
Click OK. (picture 7)
RefreshRefreshSetupSetup
ADD DEVICE ADD DEVICE
Product ModelProduct Model
1/11/1 AllAll
9322M_ONVIF
85
ManufacturerManufacturer
Q-See
Q-See 9322M_ONVIF 85
192.158.0.140
192.158.0.140
OKOK CancelCancel
IP AddressIP Address PortPort
PICTURE 6
STEP 7
Click Search. (picture 6)
SearchSearchDeleteDeleteSetupSetupAddAdd ApplyApply ExitExit
DEVICE MANAGEMENTDEVICE MANAGEMENT
CHCH Device Net Address Manufacturer StatusProduct ModelManufacturer StatusProduct ModelDevice Net Address
1/11/1
1 10.151.151.100
Q-See 9322M_ONVIF Connected
None 192.158.0.140 ONVIF ONVIF Disable
1 10.151.151.100 Q-See 9322M_ONVIF Connected
None 192.158.0.140 ONVIF ONVIF Disable
Questions or Comments? Contact Us
24/7 Technical Resources at
www.Q-See.com/support
Live Support Mon.-Fri. 6am to 7pm
Sat & Sun 9am to 5pm
All times Pacific