User manual

11
ATTENTION: Do not log in. You will
create a password later.
Step 6: Download the
QTView Mobile App
Before starting the NVR, download our free
QT View mobile app to your mobile device.
Step 7: Powering up the NVR
A. Plug the NVR power supply cord into the
DC+48V Port on the back of the NVR.
B. Plug the power supply or power adapter
into a surge protector.
C. Turn on the NVR’s power switch (if present).
The NVR will beep as it powers up, and the
Start Up Wizard will appear on-screen after
a few minutes.