User guide

43
When connecting to a LCE 4.x server, the only configuration required is the LCE server IP address or DNS name and the
port (if the server is configured for one other than the default of 31300). All other configuration options will be managed by
the LCE Client Manager upon connection.
An example screen for the LCE Windows Client Configuration tool is shown below:
By default, the LCE Log Agent client is configured using a non-routable documentation IP address (203.0.113.250) and
LCE Server Port 31300. These settings must be changed to the IP address or hostname and listening port of the actual
LCE server. No further local configuration is needed. Once set, select the “OK” button. The configuration window will close
and will prompt to restart the LCE Client Service. Settings will not be applied until the service is restarted.
Once the client connects to the LCE server and is authorized by the LCE Client Manager, the appropriate configuration
file will be pushed to the client.
Policy Parameters
The following is a list of all valid “keys” available for use in with the Windows policies: