User manual

130
The description below applies to non Intel-based NAS models running firmware prio r to version 3.3.0
and Intel-based NAS models running firmware prio r to version 3.2.0 only. If your NAS models are not
listed, please visit http://www.qnap.com for details.
Intel-based NAS
TS-x39 series, TS-x59 series, TS-x69 series, TS-509, TS-809,
TS-809 Pro, TS-809U-RP, SS-439 Pro, SS-839 Pro, TS-x59
Pro+, TS-879 Pro, TS-1079 Pro, TS-879U-RP, TS-EC879U-RP,
TS-1279U-RP, TS-EC1279U-RP
Non Intel-based NAS
TS-109, TS-209, TS-409, TS-409U, TS-x10, TS-x12, TS-x19
series
Follow the steps below to create iSCSI targets and LUN on the NAS.
A logical unit number (LUN) will be created for each iSCSI target you create. A maximum of 4 targets
and 4 LUNs can be created.
1. Under the tab “iSCSI TARGET LIST”, click “Create New iSCSI Target”.
2. Enter the target name. Specify the volume on which the iSCSI target will be created on and the
size of the target, also whether or not to pre-allocate the disk space.