User manual

75
3.7 Power Management
You can restart or shut down the NAS, specify the behaviour of the NAS after a power recovery, and
set the schedule for automatic system power on/off/restart on this page.
Re sta rt/ Shutdo wn
Restart or shut down the NAS immediately.
If you try to restart or turn off the NAS from the web-based interface or the LCD panel (if available)
when a remote replication job is in process, the NAS will prompt you to ignore the running replication
job or not.
Turn on the option “Postpone the restart/shutdown schedule when replication job is in process” to allow
the scheduled system restart or shutdown to be carried out after a running replication job completes.
Otherwise, the NAS will ignore the running replication job and execute scheduled system restart or
shutdown.
E uP Mode Config ura tio n
EuP (also Energy-using Products) is a European Union (EU) directive designed to improve the energy
efficiency of electrical devices, reduce use of hazardous substances, increase ease of product recycling,
and improve environment-friendliness of the product.
When EuP is enabled, the following settings will be affected so that the NAS maintains low power
consumption (less than 1W) when the NAS is powered off:
Wake on LAN: Disabled.
AC power resumption: The NAS will remain off after the power restores from an outage.
Scheduled power on, off, restart settings: Disabled.
When EuP is disabled, the power consumption of the NAS is slightly higher than 1W when the NAS is
powered off. EuP is disabled by default so that you can use the functions Wake on LAN, AC power
resumption, and power schedule settings properly.
This feature is only supported by certain NAS models, please visit http://www.qnap.com for details.
Wa ke o n LAN
Turn on this option to allow the users to power on the NAS remotely by Wake on LAN. Note that if the
power connection is physically removed (in other words, the power cable is unplugged) when the NAS is
turned off, Wake on LAN will not function whether or not the power supply is reconnected afterwards.
This feature is only supported by certain NAS models, please visit http://www.qnap.com for details.
Po we r re sum ptio n s ettin g s
Configure the NAS to resume to the previous power-on or power-off status, turn on, or remain off when
the AC power resumes after a power outage.