User manual

18
LE D
Colour
LE D Sta tus
De s crip tio n
Green
The NAS is ready.
Off
All the hard disk drives on the NAS are in standby
mode.
LAN
Orange
Orange
The disk data is being accessed and a read/write
error occurs during the process.
Flashes orange
The NAS is connected to the network.
10 GbE*
Green
Green
The 10GbE network expansion card is installed.
Off
No 10GbE network expansion card is installed.
HDD
Red/Green
Flashes red
The NAS is being accessed from the network.
Red
A hard drive read/write error occurs.
Flashes green
The disk data is being accessed.
Green
The hard drive can be accessed.
USB
Blue
Flashes blue every 0.5
sec
1) A USB device (connected to front USB port)
is being detected.
2) A USB device (connected to front USB port)
is being removed from the NAS.
3) The USB device (connected to the front USB
port) is being accessed.
4) The data is being copied to or from the
external USB or eSATA device.
Blue
A front USB device is detected (after the device is
mounted).
Off
1) No USB device is detected.
2) The NAS has finished copying the data to or
from. the USB device connected to the front
USB port of the NAS.
eSATA**
Orange
Flashes
The eSATA device is being accessed.
Off
No eSATA device can be detected.
*The 10 GbE network expansion function is only supported by the TS-879 Pro, TS-1079 Pro, TS-879U-
RP, TS-1279U-RP, TS-EC879U-RP, and TS-EC1279U-RP.
**TS-210, TS-212, TS-219, TS-439U-SP/RP, TS-809 Pro, TS-809U-RP do not support eSATA port.