User manual

282
To use Web Server, follow the steps below.
1. Enable the service and enter the port number. The default number is 80.
2. Configure other settings:
Configure register_globals
Select to enable or disable register_globals. The setting is disabled by default. When the web
program prompts you to enable php register_globals, enable this option. However, for system
security concern, it is recommended to turn this option off.
php.ini Maintenance
Select the option “php.ini Maintenance” and choose to upload, edit or restore php.ini.
No te : To use PHP mail(), go to “System Administration” > “Notification” > “Configure SMTP
Server” and configure the SMTP server settings.
Secure Connection (SSL)
Enter the port number for SSL connection.
3. Upload the HTML files to the network share (Qweb/Web) on the NAS. The file index.html, index.htm
or index.php will be the home path of your web page.
4. You can access the web page you upload by entering http://NAS IP/ in the web browser. Note that
when Web Server is enabled, you have to enter http://NAS IP:8080 in your web browser to access
the login page of the NAS.