User manual

36
3.2 Network
TC P/IP
(i) IP A ddre ss
Configure the TCP/IP settings of the NAS on this page. Click the Edit button ( ) to edit the network
settings. For the NAS with two LAN ports, users can connect both network interfaces to two different
switches and configure the TCP/IP settings. The NAS will acquire two IP addresses which allow access
from two different subnets. This is known as multi-IP settings*. When using the Finder to detect the NAS
IP, the IP of the Ethernet 1 will be shown in LAN 1 only and the IP of the Ethernet 2 will be shown in LAN
2 only. To use port trunking mode for dual LAN connection, see section (iii).
* TS-110, TS-119, TS-210, TS-219, TS-219P, TS-119P+, TS-219P+, TS-112, TS-212 provide one Giga
LAN port only therefore do not support dual LAN configuration or port trunking.