User manual

618
10.1 MyCloudNAS Wizard
The first time you use MyCloudNAS Service, you are recommended to use MyCloudNAS Wizard to
complete the settings. The wizard shows up automatically if you have never configured the settings
before. You can also click “Start” to use the wizard.
Follow the steps below to set up MyCloudNAS Service. To use MyCloudNAS Service, make sure you
have connected the NAS to a UPnP router and the Internet.
1. Select to use Express Setup (default) or Manual Setup. Express Setup opens the ports for HTTP
(8080), HTTP (80), FTP (21), FTPS (20) services automatically. To select the ports of the NAS
services to open, select “Manual Setup”. Click “Next”.