User manual

635
Select the NAS services to be allowed for remote access. Click “Apply to router”. The NAS will configure
the port forwarding on the UPnP router automatically. You will then be able to access these NAS
services from the Internet.
No te : If the router does not support UPnP function, you need to configure port forwarding manually
on the router. Please refer to the links below:
Application note: http://www.qnap.com/pro_application.asp?ap_id=111
FAQ: http://www.qnap.com/faq.asp
UPnP router compatibility list: http://www.qnap.com/pro_compatibility.asp