User manual

84
3.11 Firmware Update
Update Firm ware by Web Adm inistration Page
No te : If the system is running properly, you do not need to update the firmware.
Before updating the system firmware, make sure the product model and firmware version are correct.
Follow the steps below to update firmware:
1. Download the release notes of the firmware from the QNAP website http://www.qnap.com. Read
the release notes carefully to make sure it is required to update the firmware.
2. Download the NAS firmware and unzip the IMG file to the computer.
3. Before updating the system firmware, back up all the disk data on the NAS to avoid any potential
data loss during the system update.
4. Click “Browse” to select the correct firmware image for the system update. Click “Update System”
to update the firmware.
The system update may take tens of seconds to several minutes to complete depending on the network
connection status. Please wait patiently. The NAS will inform you when the system update has
completed.