Manual

ManualsBrandsQ-Tech ManualsAccessories for electricalCLASS B+

Features

• Made in the USA

• ECCN: EAR99

• DFARS 252-225-7014 Compliant:

Electronic Component Exemption

• Broad frequency range from 15kHz to 350MHz

• Rugged 4-point mount (SMD ceramic) or 3 point mount

(Others) shock resistant

• HCMOS, LVCMOS, TTL, LVDS logic

• Tristate Output option (-D)

• Hermetically sealed package

• Fundamental and 3rd Overtone design

• Swept Quartz Crystal or Cultured Quartz Crystal

• Low phase noise and jitter

• Q-Tech does not use pure lead or pure tin in its products

• Custom screening and QCI available with MCM part number

• MIL-PRF-55310/9, /16, /21, /26, /27, /28, /30, /33, /34, ,/35,

/37, /38, /39 equivalent

• RoHs compliant

Q-TECH Corporation - 10150 W. Jefferson Boulevard, Culver City 90232 - Tel: 310-836-7900 - Fax: 310-836-2157 - www.q-tech.com

1 of 27

QPDS-0001, Rev L, June 2013 (ECO #10851)

CLASS B+ PRODUCTS

HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS

2.5 to 5.0Vdc - 15kHz to 350MHz

Q-TECH

CORPORATION

Ordering Information

For Non-Standard requirements, contact Q-Tech Corporation at Sales@Q-Tech.com

Output Frequency

Frequency vs. Temperature Code(***):

2 = ± 65ppm at -55ºC to +125ºC

6 = ± 50ppm at -55ºC to +105ºC

7 = ± 75ppm at -55ºC to +125ºC

9 = ± 50ppm at -55ºC to +125ºC

10 = ±100ppm at -55ºC to +125ºC

11 = ± 50ppm at -40ºC to +85ºC

12 = ±100ppm at -40ºC to +85ºC

Logic & Supply Voltage:

(All B+ Packages)

HC = HCMOS 5.0V

L = HCMOS 3.3V

T = TTL 5.0V

N = LVCMOS 2.5V

(QT22, QT28, QT25, QT27 & QT93 Only)

LW = LVDS 3.3V

NW = LVDS 2.5V

Tristate Option:

(Standard offering in LW & NW)

Blank = No Tristate

D = Tristate

Package:

See Pages 5, 20, 21, 22

Screening Option:

S = Per MIL-PRF-38534, Class K (modified)

A = Per MIL-PRF-55310, Level S (modified)

B = Per MIL-PRF-55310, Level B (modified)

E = Engineering Model

Q T 1 88 HC D 10 S-100.000MHz

(Sample part number)

Materials Level

1 = Rad Tolerant Die, Swept Quartz Crystal

2 = Rad Tolerant Die, Cultured Quartz Crystal

3 = Class B Die, Swept Quartz Crystal

Lead Finish:

T = Standard (*)

S = Solder Dip (**)

(*) Gold Plated: 50μ ~ 80μ inches typ.

(**) Hot Solder Dip Sn60/Pb40 per MIL-PRF 55310 is optional for an additional cost

(***) Frequency stability vs. temperature codes may not be available in all frequencies

QT188HCD10S-100.000MHz

Summary of content (27 pages)

PAGE 1
CLASS B+ PRODUCTS HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.
PAGE 2
CLASS B+ PRODUCTS HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.0Vdc - 15kHz to 350MHz Q-TECH CORPORATION GENERAL SPECIFICATION 1 SCOPE 1.2 Part Number. The part number shall be as specified in the detail specification. 1.1 2 2.1 Scope. This specification establishes the general quality and reliability requirements for a family of hybrid, hermetically sealed square wave, B+ crystal oscillators. APPLICABLE DOCUMENTS Specifications and Standards.
PAGE 3
CLASS B+ PRODUCTS Q-TECH CORPORATION 3.5.1 HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.0Vdc - 15kHz to 350MHz GENERAL SPECIFICATION (Cont’d) Construction Technology. The device shall be constructed as a class 2-Type 1 hybrid oscillator of MIL-PRF-55310. 3.5.2 Workmanship. The device workmanship shall meet the requirements of MIL-PRF-55310. 3.5.4 Active Elements.
PAGE 4
CLASS B+ PRODUCTS Q-TECH CORPORATION 4.4 HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.0Vdc - 15kHz to 350MHz GENERAL SPECIFICATION (Cont’d) Customer Source Inspection. Provisions for periodic in-process source inspection by Customer shall be included in the supplier's manufacturing plan. Q-Tech will notify customer when the deliverable devices are ready for an in-process source inspection. The inspection points shall, as a minimum, be: a) Pre crystal mount visual inspection.
PAGE 5
CLASS B+ PRODUCTS HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.
PAGE 6
CLASS B+ PRODUCTS HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.
PAGE 7
CLASS B+ PRODUCTS HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.0Vdc - 15kHz to 350MHz Q-TECH Screening - Option S (Modified MIL-PRF-38534, Class K) CORPORATION Table I (Example: QT178LD10S-50.
PAGE 8
CLASS B+ PRODUCTS Q-TECH CORPORATION HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.
PAGE 9
CLASS B+ PRODUCTS Q-TECH CORPORATION Table II HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.
PAGE 10
CLASS B+ PRODUCTS Q-TECH CORPORATION HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.
PAGE 11
CLASS B+ PRODUCTS Q-TECH CORPORATION Table III HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.0Vdc - 15kHz to 350MHz Screening - Option B (Modified MIL-PRF-55310, Level B) Test Description Internal Visual Stabilization Bake Temperature Cycling Constant Acceleration Particle Impact Noise Detection (PIND) Pre Burn-In Electrical Burn-In Final Electrical Percent Defective Allowance (PDA) Seal Fine Leak Seal Gross Leak External Visual (Example: QT178LD10B-50.
PAGE 12
CLASS B+ PRODUCTS Q-TECH CORPORATION Table IV HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.0Vdc - 15kHz to 350MHz Screening Option E (Engineering Model) Test Description Internal Visual Stabilization Bake Seal Fine and Gross Leak Final Electrical Frequency vs. Temperature Stability External Visual (Example: QT122HCD9E-16.
PAGE 13
CLASS B+ PRODUCTS Q-TECH CORPORATION HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.0Vdc - 15kHz to 350MHz Electrical Performance Characteristics 15kHz to 85MHz Maximum Ratings Parameters (For FACT +5Vdc and +3.3Vdc CMOS Outputs Using 54ACT3301NSC) Supply Voltage Operating Temperature Storage Temperature Lead Solder Temperature Package Thermal Resistance Junction Temperature Symbol Vdd Top. Tstg Min. Frequency Range Frequency/Temperature Stability Supply Voltage Test Conditions +3.
PAGE 14
CLASS B+ PRODUCTS Q-TECH CORPORATION HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.0Vdc - 15kHz to 350MHz Electrical Performance Characteristics 40MHz to 200MHz Maximum Ratings Parameters Supply Voltage Operating Temperature Storage Temperature Lead Solder Temperature Package Thermal Resistance Junction Temperature (For BiCMOS +2.5Vdc, +3.3Vdc CMOS Ouputs) Symbol Vdd Top. Tstg Min.
PAGE 15
CLASS B+ PRODUCTS Q-TECH CORPORATION HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.0Vdc - 15kHz to 350MHz Electrical Performance Characteristics 50MHz to 350MHz Maximum Ratings Parameters Supply Voltage Operating Temperature Storage Temperature Lead Solder Temperature Package Thermal Resistance Junction Temperature (For BiCMOS +2.5Vdc and +3.3Vdc LVDS Ouputs) Symbol Vdd Top. Tstg Min.
PAGE 16
CLASS B+ PRODUCTS HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.0Vdc - 15kHz to 350MHz Q-TECH Reflow Profile CORPORATION The five transition periods for the typical reflow process are: Preheat Flux activation Thermal equalization Reflow Cool down FEEDING (PULL) DIRECTION 1.75±0.1 0.3±.005 2.0±0.1 ø1.5 4.0±0.1 C 24.0±0.3 B TYPICAL REFLOW PROFILE FOR Sn-Pb ASSEMBLY 11.5 5º MAX P/N FREQUENCY D/C S/N • • • • • Embossed Tape and Reel Information ø1.5 A 16±0.
PAGE 17
CLASS B+ PRODUCTS HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.0Vdc - 15kHz to 350MHz Q-TECH CORPORATION Differential Output of a QT93NW10M-312.500MHz Test Circuit Typical test circuit for CMOS logic 4 + mA 0.1µF or 0.01µF + + Power supply - Vdc - 3 Output QT178 1 2 15pF (*) 10k Ground Tristate Function The Tristate function on pin 1 has a built-in pull-up resistor typical 50kΩ, so it can be left floating or tied to Vdd without deteriorating the electrical performance.
PAGE 18
CLASS B+ PRODUCTS HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.0Vdc - 15kHz to 350MHz Q-TECH CORPORATION Jitter And Phase Noise As data rate increases, effect of jitter becomes critical with its budget tighter. Jitter is the deviation of a timing event of a signal from its ideal position. Jitter is complex and is composed of both random jitter (RJ) and deterministic jitter (DJ) components.
PAGE 19
CLASS B+ PRODUCTS HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.0Vdc - 15kHz to 350MHz Q-TECH CORPORATION Phase Noise and Phase Jitter Integration Phase noise is measured in the frequency domain, and is expressed as a ratio of signal power to noise power measured in a 1Hz bandwidth at an offset frequency from the carrier, e.g. 10Hz, 100Hz, 1kHz, 10kHz, 100kHz, etc.
PAGE 20
CLASS B+ PRODUCTS Q-TECH CORPORATION Package Outline - Dimensions are in inches (mm) HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.0Vdc - 15kHz to 350MHz QT101 QT106 Q-TECH P/N FREQ. D/C S/N Q-TECH P/N FREQ. D/C S/N .260 (6.60) .200 MAX. (5.08) MAX. .200 MIN. (5.08) .500 (12.70) .018 (.457) .600 (15.24) MIN. .018 (.457) .880 MAX. (22.35) .360 (9.14) PIN No. 1 .200 (5.08) 1 7 14 8 .505 MAX. .300 (12.83) (7.62) .100 (2.54) QT141 QT142 Q-TECH P/N FREQ.
PAGE 21
CLASS B+ PRODUCTS Q-TECH CORPORATION QT122 QT128 Q-TECH P/N FREQ. D/C S/N (Continued) Q-TECH P/N FREQ. D/C S/N Package Outline - Dimensions are in inches (mm) HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.0Vdc - 15kHz to 350MHz .120 .120 MAX. (3.05) (3.05) MAX. .05 MIN. (1.27) .060/.035 .010 (1.52/.889) (.254) .010 (.254) .05 MIN. (1.27) .375±.005 .375±.005 (9.53±.13) (9.53±.13) .050 .050 (1.27) (1.27) 8 9 8 9 .500±.005 (12.70±.13) .500±.005 (12.70±.13) .
PAGE 22
CLASS B+ PRODUCTS HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.0Vdc - 15kHz to 350MHz Q-TECH CORPORATION Package Outline - Dimensions are in inches (mm) (Continued) QT178 QT188 QT189 0.550±.0.005 0.350±0.005 0.350±0.005 (13.970±0.13) (8.89±0.13) (8.89±0.13) 4 3 Q-TECH P/N FREQ. D/C S/N 1 4 3 Q-TECH P/N FREQUENCY D/C S/N 0.350±0.005 (8.89±0.13) 1 2 3 4 Q-TECH P/N FREQ. D/C S/N 0.290±0.005 (7.37±0.13) 0.290±0.005 (7.37±0.13) 2 1 2 0.100±.005 0.100±0.005 0.100±.
PAGE 23
CLASS B+ PRODUCTS HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.
PAGE 24
CLASS B+ PRODUCTS HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.0Vdc - 15kHz to 350MHz Q-TECH CORPORATION Package Information QT101 • Package material (header and leads): Kovar • Lead finish: Gold Plated – 50μ ~ 80μ inches Nickel Underplate – 100μ ~ 250μ inches • Cover: Pure Nickel Grade A • Package to lid attachment: Resistance weld • Weight: 2.0g typ., 4.96g max.
PAGE 25
CLASS B+ PRODUCTS HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.
PAGE 26
CLASS B+ PRODUCTS HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.
PAGE 27
CLASS B+ PRODUCTS HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 2.5 to 5.0Vdc - 15kHz to 350MHz Q-TECH CORPORATION ECO Revision History REV REVISION SUMMARY Change Frequency: Was: 450kHz -350MHz Is: 250kHz -350MHz Add QT189 package 10380 K Remove USML Registration Add tolerance code 2 & 7 to Freq vs.