Manual

22
Q-TECH Corporation - 10150 W. Jefferson Boulevard, Culver City 90232 - Tel: [phone] - Fax: [phone] - www.q-tech.co m
HIGH-TEMPERATURE UP TO 225ºC
CRYSTAL CLOCK OSCILLATORS
3.3 to 15Vdc - 1Hz to 110MHz
High-Temperature (Revision E, October 2010 ) (ECO# 10001)
Q-TECH
CORPORATION
Part Numbering System
Technology
Package and Frequency
Supply Current
Supply Voltage
Q-Tech Corporation assigns a custom MCM part number for each of the customer’s specification or application. The unique part
numbering system allows Q-Tech to design, select appropriate technology (packaging, supply current, operating temperature, vibration
and shock requirement, etc.) to tailor customer’s specific needs. The part is available in standard Full Military screening (-M) per
MIL-PRF-55310, product level B. Sample part number MCM7933-3M
Standard 3.3Vdc and 5Vdc ± 10%
Available in lower and higher voltages 2.5Vdc to 18Vdc
Operating Temperature
Q-Tech extends its product offering to a wide operating tempera-
ture range from -55ºC to +225ºC.
Frequency Stability
Operating temperature and frequency dependent
Standard offerings:
Materials
• Standard AL
2
O
3
thick-film substrate
• Standard Gold (Au) and Aluminum (Al) wire bonding
• High-temperature non-conductive or Ag conductive epoxies
• Round or strip AT-Cut Fundamental or Third-Overtone quartz
crystals
• Standard design for crystal mounting for high-shock (up to
36,000g on QT78, 88, 89 and 7 x 5mm with crystal
frequencies to 24MHz)
• CMOS, HCMOS, LVHCMOS Oscillator IC or discrete
semiconductor used
• Screening to MIL-PRF-55310
• Tri-state Output (May not be available in certain low
frequencies and package types)
• Multiple Outputs
• Phase Locked Output
• Low Voltage / Low Current
• Voltage Control (VCXO / VCO)
• Hybridize customer’s designs
Symmetry
45/55% max. for Fo < 12MHz
40/60% max. for Fo ≥ 12MHz
Logic
CMOS, ACMOS, HCMOS, LVHCMOS, TTL, SINE
Options
Offering as low as ± 75ppm. Please contact Q-Tech for details.
Please contact our factory or visit our website, www.q-tech.com for technical updates.
Q-Tech high-temperature crystal oscillators were designed to
assure low power consumption.
Standard typical no load supply current on high-temperature
oscillators:
5.0V
DIP-14: 1Hz to 110MHz
DIP-8: 1Hz to 85MHz
TO-5: 10kHz to 85MHz
SMD: 15kHz to 85MHz
7x5mm 500kHz to 40MHz
0ºC to +150ºC ±150ppm, ±200ppm, ±250ppm
0ºC to +175ºC ±200ppm, ±250ppm
0ºC to +200ºC ±250ppm
0ºC to +225ºC ±450ppm
3.3V
DIP-14: 1Hz to 70MHz
DIP-8: 1Hz to 70MHz
TO-5: 10kHz to 70MHz
SMD: 15kHz to 70MHz
7x5mm 500kHz to 40MHz
QT50L8M-10kHz 2.0mA (Custom design to 0.8mA)
QT78L8M-32.768kHz 2.5mA
QT50L8-32.768kHz 2.0mA (Custom design to 1.0mA)
QT4C8M-290kHz 5mA at 10Vdc
QT50HC8-4.096MHz 2mA
QT6C8M-4.194MHz 2.2mA
QT89L8-12MHz 5mA
QT89L8M-16MHz 6mA
QT75L8M-20MHz 6mA
QT89L8M-24MHz 6mA
QT89L8M-32MHz 11mA
QT89AC8-32MHz 12mA
QT50HC8M-40MHz 12mA
QT6HC8M-44MHz 25mA
QT89L8-48MHz 15mA
QT50HC8-64MHz 30mA