User Manual

ManualsBrandsQ-Tech ManualsAccessories for electricalQT83

1 of 6

Q-TECH Corporation - 10150 W. Jefferson Boulevard, Culver City 90232 - Tel: 310-836-7900 - Fax: 310-836-2157 - www.q-tech.com

QPDS-0002, Rev H, September 2013 (ECO# 10964)

Q-TECH

CORPORATION

LOW PROFILE QT81, QT82, QT83

MINIATURE CLOCK OSCILLATORS

1.8 to 5.0Vdc - 500kHz to 160MHz

Description

Q-Tech’s surface mount 5 X 7 mm oscillator series consist

of an IC 5Vdc, 3.3Vdc, 2.5Vdc, 1.8Vdc clock square

wave generator and a miniature stripAT quartz crystal built

in a low profile ceramic package with thru-hole, formed

lead, or gull wing. This is the smallest package Q-Tech

has ever offered for High Reliability applications.. The

lead forming can provide a solution for many applications

that require additional lead attachment from an outside

subcontractor.

Applications

• Designed to meet today’s requirements for low voltage

applications

• High shock applications

• Gun launched munitions and systems

• Smart munitions

• Instrumentation

• Navigation

• Avionics

• Microprocessor clock

Ordering Information

Features

• Made in the USA

• ECCN: EAR99

• Broad frequency range from 500kHz to 160MHz

• Small footprint

• LVHCMOS, HCMOS, and TTL compatible

• 5.0Vdc, 3.3Vdc, 2.5Vdc, 1.8Vdc supply

• Able to meet 36000G shock, half sine, 0.5ms

• Wide operating temperature range

• Tri-State Output (Option D)

• Hermetically sealed ceramic package

• Fundamental and 3rd Overtone designs

• Full or partial military screening tests available

• Tape and reel packaging

• Lead free tinning available

• RoHS compliant

Specifications subject to change without prior notice.

(*) Hot Solder Dip options for an additional cost:

S = Sn60/Pb40 per MIL-PRF 55310

G = Lead free Alloy SAC305 (96.5% Sn, 3% Ag, 0.5% Cu)

• Supply voltage, frequency stability vs. temperature codes

may not be available in all frequencies.

• For Non-Standard requirements, contact Q-Tech Corporation

at Sales@Q-Tech.com

(**)Notes

Available for temperatures up to +200ºC with Q-Tech MCM number.

Output Frequency

Tristate Option:

Blank = No Tristate

D = Tristate

Logic & Supply Voltage:

HC = HCMOS +5.0V

L = LVHCMOS +3.3V

N = LVHCMOS +2.5V

R = LVHCMOS +1.8V

See notes (**)

Package:

81 =

Thru-Hole

82 =

Formed Lead

83 =

Gull Wing

Solder Dip Option:

T =Standard

S = Solder Dip (*)

G =Solder Dip (*)

Frequency vs. Temperature Code:

7 = ± 75ppm at -55ºC to +125ºC

10 = ± 100ppm at -55ºC to +125ºC

11 = ± 50ppm at -40ºC to +85ºC

17 = ± 75ppm at -60ºC to +125ºC

18 = ± 100ppm at -60ºC to +125ºC

See notes (**)

Screening Option:

Blank =No Screening

M =Per MIL-PRF-55310, Level B

Q T 81 HC D 10 M - 50.000MHz

(Sample part number)

QT81HCD10M-50.000MHz

Summary of content (6 pages)

PAGE 1
LOW PROFILE QT81, QT82, QT83 MINIATURE CLOCK OSCILLATORS 1.8 to 5.0Vdc - 500kHz to 160MHz Q-TECH CORPORATION Description Q-Tech’s surface mount 5 X 7 mm oscillator series consist of an IC 5Vdc, 3.3Vdc, 2.5Vdc, 1.8Vdc clock square wave generator and a miniature stripAT quartz crystal built in a low profile ceramic package with thru-hole, formed lead, or gull wing. This is the smallest package Q-Tech has ever offered for High Reliability applications..
PAGE 2
LOW PROFILE QT81, QT82, QT83 MINIATURE CLOCK OSCILLATORS 1.8 to 5.0Vdc - 500kHz to 160MHz Q-TECH CORPORATION Electrical Characteristics Parameters HC Output frequency range (Fo) Supply voltage (Vdd) Maximum Applied Voltage (Vdd max.) L N 500kHz — 160.000MHz 500kHz — 133.000MHz 500kHz — 100.000MHz 5.0Vdc ± 10% 3.3Vdc ± 10% 2.5Vdc ± 10% 1.8Vdc ± 10% 5.0Vdc 7.
PAGE 3
LOW PROFILE QT81, QT82, QT83 MINIATURE CLOCK OSCILLATORS 1.8 to 5.0Vdc - 500kHz to 160MHz Q-TECH CORPORATION Package Outline and Pin Connections Dimensions are in inches (mm) QT82 QT81 (7.0 ± 0.2) 4 0.197 ± .006 (5.00 ± 0.15) 4 P/N FREQ. D/C S/N 1 ESD SYMBOL FOR PIN NO. 1 .197 ± .006 (5.00 ± .150) ESD SYMBOL FOR PIN NO. 1 0.100 max. (2.54) 0.200±.005 (R .008) 4 P/N FREQ. D/C S/N .197 ± .006 (5.00 ± .150) 2 ESD SYMBOL FOR PIN NO. 1 .200 ± .008 .100 max. (2.54) .008 (.200) 2 1 .200 ± .
PAGE 4
LOW PROFILE QT81, QT82, QT83 MINIATURE CLOCK OSCILLATORS 1.8 to 5.0Vdc - 500kHz to 160MHz Q-TECH CORPORATION Output Waveform (Typical) Test Circuit TH SYMMETRY = T Tr Typical test circuit for CMOS logic x 100% + mA Tf Vdd VOH 0.9xVdd 4 Output 3 QT81 0.1µF or 2 1 0.01µF + Vdc + Power supply - - 10k 15pF (*) Ground 0.5xVdd Tristate Function 0.
PAGE 5
LOW PROFILE QT81, QT82, QT83 MINIATURE CLOCK OSCILLATORS 1.8 to 5.0Vdc - 500kHz to 160MHz Q-TECH CORPORATION Jitter And Phase Noise As data rate increases, effect of jitter becomes critical with its budget tighter. Jitter is the deviation of a timing event of a signal from its ideal position. Jitter is complex and is composed of both random jitter (RJ) and deterministic jitter (DJ) components.
PAGE 6
LOW PROFILE QT81, QT82, QT83 MINIATURE CLOCK OSCILLATORS 1.8 to 5.0Vdc - 500kHz to 160MHz Q-TECH CORPORATION Phase Noise and Phase Jitter Integration Phase noise is measured in the frequency domain, and is expressed as a ratio of signal power to noise power measured in a 1Hz bandwidth at an offset frequency from the carrier, e.g. 10Hz, 100Hz, 1kHz, 10kHz, 100kHz, etc.