User's Manual

Device Overview
How to wear your Q-Watch Z ?
Q-Watch Z User Manual
EN
Wear Q-Watch Z on your wrist
1 2
4 5
Charge your Q-Watch Z
Fasten Q-Watch Z with
buckle strap
3
Detecting your Heart Rate
Change the watch strap
Wear the band on your wrist and buckle the
strap at its best length.
Please make sure the watch is worn as tightly as
possible on the wrist without any discomfort, in order
to enhance the accuracy of heart rate signals that
are detected.
Wear the watch two fingers away from your wrist.
When "-----" text appears on the screen, please stay
still briefly for about 10 seconds to obtain a heart
rate reading.
Adjust the loop on the band to a proper
position to keep the device from falling off.
Important Notice:
Failure to follow the instructions above might cause damage to the device.
Insert one end of the spring bar into one of the holes, and slide the
latch to snap the opposite end into the other hole.
1.
2.
Q-Watch Bluetooth 4.0 Low Energy Wristband (Q-90)
Watch strap Buckle Strap
Core
Right Touch Button
Left Touch Button
Metallic contact for charging
Optical Sensor
Prior to charging Q-Watch Z, make sure it is securely placed inside the
charging box with the lid closed, and the USB connector is plugged in to a
computer or a power source via a power adapter.
Important Notice:
The product is shipped with the screen and keys locked, and will be unlocked once it is
charged via USB connection. Please make sure the "Charging" icon appears while it is
being charged, indicating the device is connected correctly and getting charged.
Video Demo:
http://ww2.voiis.com/igotu-life/charge/Q-Watch-Z
Slide the latch on the strap to depress the spring bar and release
the strap from the watch face.
1.
2.
(1)
(2)
(1)
(2)
1
2
3
Charging icon