User Guide

Thank you for choosing our Nillkin car wireless charger. Wireless charging has brought
convenience to life. Above all, from the previous customer feedback and suggestions, we concern
it's necessary to give some instructions on the products and hope you will like it. You can see how
to use the magnetic sticker in the picture.
1. We highly recommend to use the X magnetic plate instead of the U-shaped magnetic plate to
prevent phone from falling or moving around. It can be removed at any time and does not affect
the charging rate. Attach the X-shaped plate to the back of the phone or to a smooth, thin cell
phone case (not more than 2 mm thick).
Tips: Please put the U / X-shaped plate outside of the phone case. The magnet is not strong
enough to work underneath a case！
2. If you want to use the the U-shaped magnetic plate, attach it to the back of the phone and
remove the protective foil on both sides from the plate, let the phone secured by the strong
magnetic. Please note that remove the blue protective foil in front side of the magnetic plate.
If you meet any issues with our products, please feel free to contact us to have a satisfactory
solution. Thank you again for support to our store. Wish you good night.