Specifications

Highway/city mode selection

Press the

CITY button repeatedly for less than two seconds

each time to toggle through ve signal sensitivity modes.

ey are highway, city 1, city 2, city 3, and city 4. Each

mode is indicated by blinking “H” or “C” LED, with or

without a numbered LED. For city 2, 3, and 4 modes, the

RADARHAWK™ TRAVELLER II takes turns blinking “C”

LED and a numbered LED all together 3 times and keeps

blinking “C” LED alone. See following illustrations:

Highway mode

H C X K Ka L 2 3 4 M

City 1 mode

H C X K Ka L 2 3 4 M

City 2 mode

H C X K Ka L 2 3 4 M

City 3 mode

H C X K Ka L 2 3 4 M

City 4 mode

H C X K Ka L 2 3 4 M

X-band, occupied by police radar, is also shared for other

uses, such as automatic door openers like the ones used

at supermarkets, burglar alarms, terrestrial microwave

emission, and other devices. In addition, other radar

detectors in close proximity may falsely alert your

detector. To reduce false alerts, the RADARHAWK™

TRAVELLER II has four city ltering settings. Each

move (from highway to city 1, city 1 to city 2, city 2 to

city 3) will give you the rejection of X-band alarms by

approximately 20%.

RADAR OPERATION

H C X K Ka L 2 3 4 M