Specifications
5
PRE-OPERATING INFORMATION
You can use the RADARHAWK™ TRAVELLER II with your
hands-free ear piece or amplied speakers by connecting
your ear piece or speakers to the auxiliary audio jack of
the unit. You must have an ear piece or speakers with a
2.5mm (
1
/10˝) plug. If you have an ear piece or speakers
with dierent sized plug, use a 2.5mm adapter between the
plug and the jack. Please note that we do not provide ear
pieces, speakers, or 2.5mm adapters.
e RADARHAWK™ TRAVELLER II is designed to
operate on two AA alkaline batteries. To ensure maximum
performance, we advise that you should not use other battery
types. You may use AA alkaline rechargeable batteries.
However, the resulting battery life will be extremelly short
because of characteristics of rechargeable batteries.
Do not leave the RADARHAWK™ TRAVELLER II exposed
to extreme heat like strong sunlight. It can damage the unit
and battery.
Battery installation
1. Remove the battery compartment door at the bottom of
the unit when the unit is powered o.
2. Remove any old batteries (both batteries must be replaced
at the same time.).
3. Press down two fresh AA alkaline batteries into place,
observing the polarity indication inside the battery
compartment.
4. Replace the battery compartment door.
5. Turn the unit on to verify correct battery installation.