Data Sheet

QANTEK Technology Corporation
Phone: [phone] (tollfree) www.qantek.com
Fax: [phone] (tollfree) [e-mail]
QC32 Series
2.5x3.2 4-Pad SMD Quartz Crystal Unit
Features
• Low in height, suitable for thin equipment
• Ceramic package and metal lid assures high
reliability
• Tight tolerance and stability available
Equivalent Series Resistance (ESR)
Frequency Range - MHz
Ω max. Mode of Operation
10.000 to 20.000 100 Fundamental
20.100 to 25.000 80
25.100 to 60.000 60
General Specifications
Frequency Range
10.000 to 60.000MHz (Fundamental)
Frenquency Tolerance at 25°C
±10 to ±100ppm (±30ppm standard)
Frequency Stability over Temperature Range
See Stability vs. Temperature Table
Storage Temperature -55 to +125°C
Load Capacitance C
L
7 to 32pF and Series Resonance
Shunt Capacitance C
0
5.0pF max.
Equivalent Series Resistance (ESR) See ESR Table
Drive Level 100μW max.
Aging per Year ±3ppm max.
Insulation Resistance (MΩ)
500 at 100Vdc ±15Vdc
Mechanical Dimensions
Applications
• High density applications
• Modem, communication and test equipment
• PMCIA, wireless applications
• Automotive applications
Frequency Stability vs. Temperature
Operating Temperature ±10ppm ±20ppm ±30ppm ±50ppm ±100ppm
-20 to +70°C
    
-40 to +85°C **
   
-40 to +105°C
- - -
 
-40 to +125°C
- - - -

*Operating Temperature -30 to +80°C
 standard  available
QC32 Rev. 0.4
Part Numbering Guide
Qantek
Code
Package
Nominal Frequency
(in MHz)
Vibration
Mode
Load
Capacitance
Operating Tem-
perature Range
Frequency
Tolerance
Frequency
Stability
Automotive
Indicator
Packaging
Q = Qantek C32 = 2.5x3.2 4-Pad
= SMD
7 digits including the
decimal point
(f.ie. 12.0000)
F = AT-Fund S = Series
08 = 8pF
12 = 12pF
18 = 18pF
20 = 20pF etc.
A = -20 to +70°C
B = -40 to +85°C
C = -40 to +105°C
D = -40 to +125°C
1 = ±10ppm
2 = ±20ppm
3 = ±30ppm
5 = ±50ppm
0 = ±100ppm
1 = ±10ppm
2 = ±20ppm
3 = ±30ppm
5 = ±50ppm
0 = ±100ppm
A = AEC-Q200 M = 250pcs Tape&Reel
R = 1000pcs Tape&Reel
R3 = 3000pcs Tape&Reel
Example: QC3212.0000F12B33R bold letters = recommended standard specification