Quick Setup Guide

How to Setup
Before you Begin...
Just a few quick steps, and you’ll be Qballin’ in no time!
It’s important to charge your Qball
fully before the fun starts.
Here’s how to do it!
Quiet Toss
Qball knows when to be quiet.
The Qball is a smart microphone that knows
when it is being tossed and automatically
mutes itself to avoid any unwanted noise.
Hush Mode
Qball knows when to stay quiet.
Done using the Qball for a bit? Simply flip the
Qball uspside down onto the Windscreen and
it will automatically mute istelf.
Auto Sleep
Save battery life for more fun times ahead.
To save battery life the Qball automatically
goes into standby mode if no movement
is sensed for 15 minutes. To wake it back up
just give it a shake.
Auto O
Forget to turn o the Qball? No problem.
After two hours of inactivity, the Qball will
automatically turn itself off. So, if you forget
to manually power off— no worries. Odds are,
there’s more fun to be had on that charge.
Toggle on or o by quickly pressing the
mode button.
Toggle on or o by pressing the mode
button for two seconds.
Toggle on or o by quickly pressing the
mode button.
Toggle on or o by pressing the mode
button for two seconds.
Qball’s Awesome Features
1. Access Qball Controls
STEP 2
:
Twist counter-clockwise 1/8
th
of a turn, and pull it out to reveal the
Microphone and Controls.
STEP 1
:
Firmly grasp the windscreen
(as indicated by the orange dots).
Then...
2. Charge before first use
Plug the Qball into the charging port using
the included MicroUSB cable. Charge
until the Red charging LED turns Green
before first use.
STEP 1.1
:
Plug the Receiver
into the wall with the provided
MicroUSB power cable, and it will
turn on automatically.
STEP 1.2
:
Connect one end
of the provided Audio Cable into
the OUT port on the back of the
Receiver.
STEP 1.3
:
Connect the other end
of the Audio Cable into the AUX IN
port on your speaker.
STEP 1’S OBJECTIVE
:
Setup the Receiver—which is how
Qball “talks” to your speakers.
*For instructions on when to use the LINE IN
port, check out buyqball.com/setup.
*
123
Step 1 of 2
STEP
2’S OBJECTIVE
:
Power on the Qball, Pair, then Play!
STEP 2.1
:
Once your Qball is charged,
turn it on by pressing the power button.
STEP 2.2
:
The LED indicator light
around the power button will change
from flashing Blue to solid Blue,
indicating a connection has been made.
STEP 2.3
:
You can then adjust the
volume using the and buttons.
Replace the Windscreen, and you’re all
set!
Step 2 of 2