User's Manual

5 SD Card Introduction
Your mobile phone supports SD card to expand the memory. Install the SD card according
to the indication.
As one of storages for your phone, SD card has been set as the default storage at factory.
You can directly use it without making any settings.
Use as flash disk: If “Phone——Data Wire——PC” is well connected, the PC will prompt
“New hardware is found”, and “MT65xx Android Phone requires to be installed” will appear in
the dialog box, see the figure below:
Check the relevant menus in the phone are opened or closed, selecting one by one as follows:
Main Menu - Settings - Application - Development - USB debugging. Uncheck “USB
debugging”.
After checking and confirmation, reconnect “Phone - Data Wire - PC”, and pull down
notification menu in the standby interface: