QBOX Mini-1000 Series Fanless Box PC with Intel® Atom™ E640T Processor User’s Guide QBOX Mini-1000 Series User’s Manual I
Contact Info: Quanmax Inc. 4F, No. 415, Ti-Ding Blvd. Sec. 2NeiHu District, Taipei 114Taiwan Tel: +886-2-2799-2789 Fax: +886-2-2799-7399 Visit our site at: www.quanmax.com © 2012 Quanmax Inc. All rights reserved. The information in this user’s guide is provided for reference only. Quanmax does not assume any liability arising out of the application or use of the information or products described herein.
Content Content Content....................................................................................................................... 3 Figures ....................................................................................................................... 4 Tables ......................................................................................................................... 5 Safety Instructions .....................................................................................
Figures Figures Figure 1 I/Os .............................................................................................. 17 Figure 2 Mechanical Dimensions ............................................................... 19 Figure 3 VGA/HDMI ................................................................................... 20 Figure 4 Connect USB mouse & keyboard ................................................ 20 Figure 5 Turning on the system............................................................
Tables Tables Table 1 QBOX Mini-1000 Series Specification ........................................... 16 Table 2 BIOS Main Menu ........................................................................... 23 Table 3 Advanced Menu ............................................................................. 24 Table 4 Advanced Menu – ACPI Settings ................................................... 24 Table 5 Advanced Menu – CPU Configuration ...........................................
Safety Instructions Safety Instructions Before You Begin Before handling the product, read the instructions and safety guidelines on the following pages to prevent damage to the product and to ensure your own personal safety. Refer to the “Advisories” section in the Preface for advisory conventions used in this user’s guide, including the distinction between Warnings, Cautions, Important Notes, and Notes. Always use caution when handling/operating a computer.
Safety Instructions When Working Inside a Computer Before taking covers off a computer, perform the following steps: 1. Turn off the computer and any peripherals. 2. Disconnect the computer and peripherals from their power sources or subsystems to prevent electric shock or system board damage. This does not apply when hot swapping parts. 3. Follow the guidelines provided in “Preventing Electrostatic Discharge” on the following page. 4.
Safety Instructions Preventing Electrostatic Discharge Static electricity can harm system boards. Perform service at an ESD workstation and follow proper ESD procedure to reduce the risk of damage to components. Quanmax strongly encourages you to follow proper ESD procedure, which can include wrist straps and smocks, when servicing equipment.
Safety Instructions Instructions for Lithium Battery WARNING Danger of explosion when battery is replaced with incorrect type. Only replace with the same or equivalent type recommended by the manufacturer. Do not dispose of lithium batteries in domestic waste. Dispose of the battery according to the local regulations dealing with the disposal of these special materials (e.g.
Preface Preface How to Use This Guide This guide is designed to be used as step-by-step instructions for installation, and as a reference for operation, troubleshooting, and upgrades. NOTE Driver downloads and additional information are available under Downloads on our web site: www.quanmax.com. Unpacking When unpacking, follow these steps: 1. After opening the box, save it and the packing material for possible future shipment. 2. Remove all items from the box.
Preface area (domestic environment) is likely to cause harmful interference, in which case the user will be required to correct the interference (take adequate measures) at their own expense. The user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Preface Return Procedure For any Limited Warranty return, please contact Support at www.quanmax.com and login to obtain a Return Material Authorization (RMA) Number. If you do not have an account, send an email to support@quanmax.com to apply for one. All product(s) returned to Quanmax for service or credit must be accompanied by a Return Material Authorization (RMA) Number.
Preface failure of chips or mechanical failure of devices. If the system has been exposed to abnormally cold temperatures, allow a two-hour warm-up period to bring it up to normal operating temperature before turning it on. Failure to do so may cause damage to internal components, particularly the hard disk drive. Humidity High-humidity can cause moisture to enter and accumulate in the system.
Preface Uninterruptible Power Supply Uninterruptible power supply (UPS) systems offer the most complete protection against variations on power because they use battery power to keep the server running when AC power is lost. The battery is charged by the AC power while it is available, so when AC power is lost, the battery can provide power to the system for a limited amount of time, depending on the UPS system.
Chapter 1 Chapter 1 Introduction Overview The QBOX Mini-1000 series ,a fan-less Box PC, is ideal for space critical applications. This embedded hardware platform is designed with Intel® Atom™ E640T Processor which provides with excellent performance. The system is supported with on board DDR2 memory to 1GB. Featured are 1x mSATA,1x mini-PCIe socket for Wifi module, 1 x USB 2.0, 2x internal USB, 1x VGA (For QBOX Mini-1000), 1x HDMI ( For QBOX Mini-1010) and 1x Phone Jack for both Line-Out & Mic-In.
Chapter 1 Product Specifications ® CPU Support Intel Atom™ E640T (1GHz, 512KB Cache (TDP: 3.
Chapter 1 System Tour Refer to the figure below to identify the components of the system.
Chapter 1 Power Button The power button with power LED allows powering ON and OFF the system. Phone Jack Audio Out The green stereo headphone jack is used to connect the system’s audio out signal to amplified speakers or headphones. MIC-IN The pink microphone jack is designed to connect the microphone used for video conferencing, voice narrations, or simple audio recordings.
Chapter 1 Mechanical Dimensions QBOX Mini-1000 : QBOX Mini-1010 : 130.11 x 83.06 x19.
Chapter 2 Getting Started Setting up your PC Connect the VGA/ HDMI cable from your display to the VGA/HDMI port. QBOX Mini-1000 : QBOX Mini-1010 : VGA HDMI Figure 3 VGA/HDMI Connect USB mouse & keyboard Your QBOX Mini-1000 series does not come with a keyboard and mouse connector, but you can use any USB keyboard or mouse to connect with your computer. USB Figure 4 Connect USB mouse & keyboard NOTE Using a third-party USB mouse or keyboard may require software drivers.
Chapter 2 Turning on the system 1. Connect the power adapter cable to the DC Jack (DC IN) of the QBOX Mini-1000 series 2. Connect the power cable to the power adapter 3. Connect the power cable to a power outlet 4.
Chapter 3 Chapter 3 AMI BIOS Setup Overview This chapter provides a description of the AMI BIOS. The BIOS setup menus and available selections may vary from those of your product. For specific information on the BIOS for your product, please contact Quanmax. NOTE: The BIOS menus and selections for your product may vary from those in this chapter.
Chapter 3 Main Menu The BIOS Setup is accessed by pressing the DEL key after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins. Once you enter the BIOS Setup Utility, the Main Menu will appear on the screen. The Main Menu provides System Overview information and allows you to set the System Time and Date. Use the “<” and “>” cursor keys to navigate between menu screens.
Chapter 3 Advanced Menu Table 3 Advanced Menu BIOS SETUP UTILITY Main Advanced Boot Security Server Mgmt Save & Exit Save & Exit >ACPI Settings > CPU Configuration > USB Configuration > H/W Monitor > JMB36X ATA Controller Configuration > WatchDog Timer Configuration Version 2.11.1210. Copyright (C) 2011, American Megatrends, Inc.
Chapter 3 Table 5 Advanced Menu – CPU Configuration BIOS SETUP UTILITY Main Advanced Boot Security CPU Configuration Processor Type Genuine Intel ® CPU EMT64 Processor Speed System Bus Speed Supported 1000 MHz 400 MHZ Ratio Status 10 Actual Ratio 10 System Bus Speed Processor Stepping Microcode Revision L1 Cache RAM L2 Cache RAM Processor Core Hyper-Threading Intel SpeedStep 400 MHz 20661 260 56 k 512 k Single Supported Hyper-Threading [Enabled] Execute Disable Bit [Enabled] Server Mgmt
Chapter 3 Table 6 Advanced Menu –USB Configuration BIOS SETUP UTILITY Main Advanced Boot Security Save & Exit USB Configuration . USB Devices: Select Screen ↑↓ Select Item Enter: Select +- Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4 Save & Exit ESC Exit 1 Drive, 1 Keyboard, 1 Mouse, 1 Hub Legacy USB Support [Enabled] EHCI Hand-off [Disabled] Mass Storage Devices: San Disk [Auto] Version 2.11.1210. Copyright (C) 2011, American Megatrends, Inc.
Chapter 3 Table 8 Advanced Menu –JMB36X ATA Controller Configuration BIOS SETUP UTILITY Main Advanced Boot Security Save & Exit SanDisk SSD P4 (8GB) SATA Port 0 ATA Controller Select Screen ↑↓ Select Item Enter: Select +- Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4 Save & Exit ESC Exit [ IDE Mode ] Version 2.11.1210. Copyright (C) 2011, American Megatrends, Inc.
Chapter 3 Boot Menu Table 10 Boot Menu BIOS SETUP UTILITY Main Advanced Boot Configuration Quiet Boot Fast Boot Setup Prompt Timeout Bootup NumLock State Boot Security [Disabled] [Disabled] 1 [On] Boot Option Priorities Boot Option #1 Boot Option#2 Hard Drive BBS Priorities [SATA PM: SanDISK…] [UEFI: SanDisk] Fast Boot Options: Disabled, Enabled Boot Option #1 Options: SATA PM: SanDisk SSD P4 8GB UEFI : SanDisk Disabled Boot Option #2 Options: SATA PM: SanDisk SSD P4 8GB UEFI : SanDisk Disabled H
Chapter 3 Security Menu Table 11 Security Menu BIOS SETUP UTILITY Main Advanced Boot Security Save & Exit Password Description If ONLY the Administrator’s password is set, then this only limits access to Setup and is only asked for when entering Setup If ONLY the User’s password is set, then this is a power on password and must be entered to boot or enter Setup.
Chapter 3 Save Changes and Exit Exit system setup after saving the changes. Once you are finished making your selections, choose this option from the Exit menu to ensure the values you selected are saved to the CMOS RAM. The CMOS RAM is sustained by an onboard backup battery and stays on even when the PC is turned off. When you select this option, a confirmation window appears. Select [Yes] to save changes and exit. Discard Changes and Exit Exit system setup without saving any changes.
Chapter 4 Chapter 4 Driver Installation If your QBOX Mini-1000 series does not come with an operating system pre-installed, you will need to install an operating system and the necessary drivers to operate it. After you have finished assembling your system and connected the appropriate power source, power it up using the power supply and install the desired operating system. You can download the drivers for the QBOX Mini-1000 series from the Quanmax website at www.quanmax.