How-To Guide

Touch panel
Pogo pins
Mic
LED
LED
Touch panel
Pogo pins
Mic
Charging
case button
How to Connect Factory Setting
First Time Connection:
For better use experience,please scan
to download QCY APP before start-up.
Overview
Above pictures are for reference only and practical items
may vary.
Type-C cableCharging case
LED
1. Push earbuds into case, open lid and keep pressing
charging case button for 10s to set earbuds to factory(LEDs
on earbuds blink red 5 times).
2. After factory setting, earbuds will auto pair with each other
and turn connectable to phone when picked up.
LED on Case
Battery level of case ≥ 20%（White）
Battery level of case ＜ 20%（Red）
Functions
Warranty Card
Comments:
Warranty Period
12 months after you purchase this item (or you may inquire
your local shopper for more details).
Free Service：
Supposing any defects caused by quality issues occur within
the warranty period , please take this warranty card and
purchase receipts to your distributor for free exchange
servIce.
Free exchange service will not be accessed under following
circumstances:
1. Damages caused unauthorized disassembly.
2. Defects or physical damages caused by leaking or
dropping o.
3. Damages by act of God. Supposing your item is within
any damages or defects except the above circumstances,
please return to us or your distributor for free repairing.
Model Number:
Date of Purchasing:
User's Name:
User's Phone:
User's Address:
Shop's Name:
Shop's Address:
FCC Statement
This equipment has been tested and found to comply with the
imits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician
for help.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
Hazardous substances and their contents in the item
Hazardous Substances
Part
Name
Pb Hg Cd
Cr
(VI)
PBB PBDE DIBP DEHP DBP BBP
Main body
Battery
Ear tips
Accessories
Charging
cable
This form is made by SJ/T 11364 regulation.
O : means that hazardous substance content in the
homogeneous materials of this part is within the
limits of (EU) 2015/863 regulation.
X : means that hazardous substance content in, at least,
one certain homogeneous material of this part is
beyond the limits of (EU) 2015/863 regulation, but
there is no mature alternative in the industry at present,
it still conforms to the EU ROHS Directive in the scope
of exemption.
Notes: Please arrange using time properly as your hearing
may be damaged by using the device for a long time.
Manufacturer: Dongguan Hele Electronics Co., Ltd.
Address: No. 325 Yuehui Rd. Daojiao Town Dongguan City
Guangdong Province China
1. Pick up both earbuds, tear o the protective films and push
them back in the case. Then close the lid to activate them.
2. Open lid to power on. On phone, search "QCY Fairy
Pods" and tap to connect.
How to Wear
1.Please put on earbuds properly then adjust them to
fit yourself.
2. Set microphone towards your mouth.
3. It will cause a bad calling or listening experience to
wear them in a wrong way.
LED will glow solid red when the case is getting charged and
turn solid white when topped up.
Charging Case
* Earbuds cannot get connected with two devices at the same
time.They will auto reconnect to the last device in connectivity
record, if any.
Power-on: Keep touching either panel for 1.5s
Power-o: Push earbuds into the case and close the lid
Answer/end call: Double touch either panel
Ignore call: Keep touching either panel for 1.5s
Skip track backward: Keep touching left panel for 1.5s
Skip track forward: Keep touching right panel for 1.5s
Playback/pause: Double touch either panel
Voice assistant: Triple touch left panel
Gaming mode: Triple touch right panel
Volume control: Set via QCY APP
One-tap-to-photograph: Set via QCY APP
1. Before using the earbuds, please read the manual
carefully and keep it for future references.
2. The earbuds need to be fully charged prior to first-time use.
3. If the earbuds are left unused for over two weeks, please
recharge.
4. Please use the chargers made by qualified manufacturer.
5. If earbuds fail to be found by phone, please re-turn them
connectable or restore factory settings. If a program error
of phone occurs, please turn o and on Bluetooth function
or reboot the phone.
Tips
1. Never disassemble or modify your earbuds for any
reasons to avoid any damages and danger.
2. Do not store the earbuds in extreme temperatures (under
0°C or over 45°C).
3. Avoid using the indicator close to the eyes of children or
animals.
4. Do not use the earbuds during a thunderstorm to avoid
dysfunction and increasing risk of electricshock.
5. Do not use harsh chemicals or strong detergents to clean
the earbuds.
Note: please do not use earbuds for a long time as may
damage your hearing.
Caveats
QCY AilyPods Pro
Semi-in-Ear Tru e Wireless Earbuds
How to Switch Connection Between Two Devices
Open lid, push both earbuds in the case and keep pressing
the charging case button for 3s or until LED on one earbud
blinks white slowly while the other glows solid white to
disconnect them from DeviceA. On DeviceB, search "QCY
FairyPods" and tap to connect.