Use and Care Manual

– 10 –
TROUBLESHOOTING
OVERHEATING OF SAW:
1. Turn saw off and let it rest until motor is cool
to the touch.
2. Check and clean the ventilation slots,
removing blockage and dirt.
THE SAW DOES NOT START:
1. Check that power cord is properly plugged in.
2. Check outlet power source and circuit
breaker.
3. Make sure yellow safety key is fully pushed
into switch.
Q.E.P. CUSTOMER SERVICE:
1-866-435-8665
PARTS LIST
See exploded parts (p. 11)
PART # DESCRIPTION Qty
22650Q-1
Angle Guide 1
22650Q-2
Rip Guide 1
22650Q-3
Lock Piece for the Rip Guide 1
22650Q-4 Locking Clip for the Rip
Guide
1
22650Q-5
Cylinder Pin 1
22650Q-6 Cross Recessed Pan Head
Tapping Screw
1
22650Q-6A Assembled Rip Guide
(not pictured)
1
22650Q-7
Left Cutting Table 1
22650Q-8 Locking Knob for the Blade
Guard
1
22650Q-9
Blade Guard 1
22650Q-10
Hexagon Bolt 1
22650Q-11 Cross Recessed Pan Head
Tapping Screws
3
22650Q-12
Rack for the Blade Guard 1
22650Q-13
Right Cutting Table 1
22650Q-14 Support for Adjusting Miter
Cutting Angles
1
22650Q-15
Bases for the Supports 2
22650Q-16
Plain Washers 8
22650Q-17
Anti-loosing Nuts 8
22650Q-18 Support for Adjusting Miter
Cutting Angles
1
22650Q-19 Cross Recessed Pan Head
Tapping Screws
8
PART #
DESCRIPTION Qty
22650Q-20
Upper Frame 1
22650Q-21
Tube for Extension Tables 2
22650Q-22
Extension Table 1
22650Q-23 Pan Head Screw with Cross
Recess
2
22650Q-24
Pads 2
22650Q-25
Plain Washers 2
22650Q-26
Main Frame 1
22650Q-27
Splash Bafe 1
22650Q-28
Capacitor 1
22650Q-29
Rubber Washers 4
22650Q-30 Cross Recessed Pan Head
Tapping Screws
4
22650Q-31
Motor 1
22650Q-32
Oil Seal for Motor 1
22650Q-33
Plastic Nut 1
22650Q-34
Inner Flange 1
6-7003Q
Blade 1
22650Q-36
Outer Flange 1
22650Q-37
Hexagon Nut 1
22650Q-38
Fixing for the Protector 1
22650Q-39
Protector for the Switch 1
22650Q-40
Switch 1
22650Q-41
Power Cord Shelter 1
22650Q-42
PVC Feet 4