User manual

PBX-3011BT REAR PANEL
-3-
PBX-3011BT
1. Antenna is for receiving the FM signal. Before use, pull up the telescopic FM antenna. After
use,pack up the FM antenna to better protect it.
2. DC 12V IN is for connecting to 12V external battery if needed.
3. 12V FUSE: Provided battery is damaged or internal short circuit, the fuse will be burnt in order
to protect the machine & battery. The unit can work well after replace a new fuse.
4. Power Supply: The power switch should be set to the off position before the power supply is
connected.
5. Voltage Selector 120V-240V. Be sure the unit's voltage in the outlet you are using.
6. Power Button: Press this button to power the unit on, off or to charge the unit. If the battery
needs to be charged, set the unit to AC and connect the power cable to the rear of the unit.
When set to AC, the unit can also be powered by an external power supply (electrical outlet) even
if the battery is dead. In this case you need to have the unit set to the voltage corresponding to
the voltage of the outlet. To turn the unit off set the power button to OFF. It is recommended to
fully charge the battery prior to using the unit for the first time. It is also recommended to charge
the battery at least every 2-3 months to keep the battery operating to it highest capacity.
7. AUX2 Input(1/8"): The 1/8” AUX Input is designed to connect directly to a mp3 player or any
other stereo level audio device. Please note that there are two AUX Inputs, RCA and 1/8”. If
both the RCA and 1/8”inputs are connected the unit is automatically play from the 1/8” AUX input.
8. AUX1 Input (RCA): The RCA Input is designed to connect directly to a CD/DVD/TV or any
other stereo level audio device.
Please note that there are two AUX Inputs, RCA and 1/8”. If both the RCA and 1/8”inputs are
connected the unit is automatically play from the 1/8” AUX input. To play from the RCA AUX
input, please disconnect the 1/8” connection from the 1/8” AUX Input.