Instruction manual

- Press SOURCE button on unit top or remote control to set the unit in TV mode.

SELECT DESIRED PROGRAM

1. Press CH+ button to play next channel.

2. Press CH- button to play previous channel.

3. Press numeric buttons on the remote control directly to select desired program.

Example : Track 9, press ＂9＂, three seconds later it will turn to track 9 automatically, or

press ENTER button to confirm directly.

Track 12, press ＂1＂ and ＂2＂, three seconds later it will turn to track 12 automatically,

or press ENTER button to confirm directly.

NOTE : If one frequency dot has more than one channel, for example, track 15-3,

press ＂1＂ and ＂5＂, then press ＂-/--＂ and ＂3＂, three seconds later it will turn to

track 15-3 automatically, or press ENTER button to confirm directly.

VOLUME CONTROL

- Press VOL+ or VOL- to adjust the level of current volume.

Available range: 0-100.

MUTE CONTROL

- Press MUTE button to mute the sound, press it again to turn on the sound.

SOURCE SETTING

- Press SOURCE button on unit top or remote control to display the input source list.

- Press UP or DOWN navigation button to select desired input source, and then press OK

button to confirm selection.

Available options: TV, AV, HDMI, VGA, USB, DVD.

PICTURE MODE

- When watching an available program, press PICTURE button on remote control

repeatedly to select desired PICTURE mode directly.

Available options: Standard, Dynamic, Mild, User.

SOUND MODE

- When watching an available program, press SOUND button on remote control repeatedly

to select SOUND mode directly.

Available options: Standard, Music, Movie, User.