User's Manual

5. When the desired setting is displayed, press and hold the Re/Pa/Save button to

save the setting. A long “beep” will sound to confirm the setting has been saved.

6. Continue with programming or press the Voice Mail/Func button to return to

STANDBY mode.

NOTE: The standard and default flash time setting is 600 msec. This is the setting you

should use to access standard telephone services such as cal waiting. This setting is

adjustable to alow for PBX and other special uses.

H. Changing the Pause Time

1. Press and hold the Voice Mail/Func button to enter the menu.

2. Press the 8 button to go to the PAUSE TIME programming option.

3. Press the Flash/Edit button to change the setting. “4” will begin flashing.

4. Press the SCROLL UP or DOWN button to select the desired time delay.

5. When the desired setting is displayed, press and hold the

Re/Pa/Save

button to

save the setting. A long “beep” will sound to confirm the setting has been saved.

6. Continue with programming or press the Voice Mail/Func button to return to

STANDBY mode.

I. Programming One-Touch Voice Mail Dialing

1. Press and hold the Voice Mail/Func button to enter the menu.

2. Press the 9 button to go to the VOICE MAIL programming option.

3. Press the Flash/Edit button to enter the voice mail speed dial number.

4. Press the TELEPHONE KEYPAD 1 to 0 buttons to enter the phone number used to

access your voice mail messages (up to 15 digits).

5. When the desired setting is displayed, press and hold the

Re/Pa/Save

button to

save the setting. A long “beep” will sound to confirm the setting has been saved.

6. Continue with programming or press the

Voice Mail/Func

button to return to

STANDBY mode.

Caller ID System Operation