User's Guide

OEM Integration Instructions：
This device is intended only for OEM integrators under the following conditions：
The module can be used to installation in other host. And the transmitter module may not be
co-located with any other transmit or antenna. The module shall be only used with the
integral antenna(s) that has been originally tested and certified with this module. This module
must not be incorporated into any other device or system without retesting for compliance as
a composite system per Part 2.947(f). However, the OEM integrator is still responsible for
testing their end-product for any additional compliance requirement with this module
installed (for example, digital device emission, PC peripheral requirements, etc.)
IMPORTANT NOTE：
In the event that these conditions cannot be met (for example certain laptop configuration or
co-location with another transmitter), then the FCC authorization for this module in
combination with the host equipment is no longer considered valid and the FCC ID of the
module cannot be used on the final product. In these and circumstance, the OEM integrator
will be responsible for re-evaluating. The end product (including the transmitter) and
obtaining a separate FCC authorization. The final end product must be labeled in a visible area
with the following:
“Contains Transmitter Module FCC ID: 2ASR8NFCV3 or
Contains FCC ID: 2ASR8NFCV3”.