Qingdao Intelligent & Precise Electronics Co., Ltd ZDGF7618BU-PT User Manual Product Name:IEEE 802.11 a/b/g/n/ac 2.
1. Introduction Thank you for using the Wi-Fi module product provided by Qingdao Intelligent &Precise Electronics Co., Ltd. Before use, please read this user manual carefully. Please follow the technical specifications when using the module in your design and develop activities. Qingdao Intelligent &Precise Electronics Co., Ltd has the right to change the contents of this manual in accordance with the needs of the technical development.
Label Host labeling requirement:”Contains transmitter module FCC ID: 2AJVQ-7618BUPT”. Host labeling requirement:”Contains transmitter module IC: 22470-7618BUPT”. 2.Product Information 2.1 Product Information ZDGF7618BU-PT Wi-Fi USB module is a wireless signal module device work at 2.4GHz(2.400 ~ 2.4835GHz)/5GHz (5.150 ~ 5.85GHz) .ZDGF7618BU-PT comply with IEEE 802.11a、802.11b、802.11 g 、802.11 n and 802.11 ac standard. It support up to 867Mbps physical layer transmitting rate. ZDGF7618BU-PT support USB 2.
802.11n:64QAM, 16QAM, QPSK, BPSK 802.11ac:256QAM, 64QAM, 16QAM, QPSK, BPSK Working Frequency 2400-2483.5MHz for US and Canada 5150-5350MHz for US and Canada 5470-5725MHz for US and 5470-5580MHz,5660-5725MHz for Canada 5725-5850MHz for US and Canada Receiver Sensitivity 11b @ 11Mbps: (Max.) : -84dBm , (Typical) : -87dBm (PER<8%) 11g @ 54Mbps: (Max.) : -69dBm , (Typical) : -77dBm (PER<10%) 11n @ MCS7 (2.4g HT20): (Max.) : -67dBm , (Typical) : -73dBm (PER<10%) 11n @ MCS7 (2.4g HT40): (Max.
11 12 WiFi_DEV_WAKE — 4.3 Block Diagram BLOCK DIAGRAM 5 EU single contact point Hisense Czech (Manufacture) s.r.o. U Nové Hospody 1164/4, 301 00 Plzeň ,Czech Republic. 6 Manufacture’s postal address No.218,Qianwangang Road, Qingdao Economic & Technological Development Zone,Shandong,China 7 Importer’s name & address The importer is not determined, the importer’s name and address will be declared in this user manual when the importer is determined.
8. The requirement for KDB 996369 D03: 8.1 List of applicable FCC rules FCC Part 15. 247 and FCC Part 407. 8.2 Summarize the specific operational use conditions None 8.3 Limited module procedures The module is a single module, so this requirement is not applicable to the product. 8.4 Trace antenna designs The module uses the permanent PCB antenna, so this requirement is not applicable to the product. 8.