User's Manual
2
To ensure compliance, operations at closer than this distance is not recommended.
Les antennes installées doivent être situées de facon à ce que la population ne puisse y être exposée à une distance
de moin de 20 cm. Installer les antennes de facon à ce que le personnel ne puisse approcher à 20 cm ou moins de la
position centrale de l’ antenne.
La FCC des éltats-unis stipule que cet appareil doit être en tout temps éloigné d’au moins 20 cm des personnes
pendant son functionnement.
Region Selection
Limited by local law regulations, version for North America does not have region selection option.
Label
Host labeling requirement: Contains transmitter module FCC ID: 2AJVQ-RK8812CU”.
Host labeling requirement: Contains transmitter module IC: 22470-RK8812CU”.
2.Product Information
2.1 Product Information
ZDRK8812CU Wi-Fi USB module is a wireless signal module device work at 2.4GHz(2412-2462MHz)/5GHz (5150-
5350MHz and 5470-5850MHz) .ZDRK8812CU complies with IEEE 802.11a、802.11b、802.11 g、802.11 n and
802.11 ac standards. It supports up to 867Mbps physical layer transmitting rate. ZDRK8812CU support USB 2.0,
which has up to 480Mbps data rate.
ZDRK8812CU has 2T2R structure,has one onboard Antenna. It could provide stable wireless link with high
throughput.
ZDRK8812CU is a wireless signal module. It could transmit and receive Wi-Fi wireless signal device without radar
detection. It is widely used to multi-media device, such as smart TV. Equipped with ZDRK8812CU, a smart TV could
access to Wireless Local Network, which is also called WLAN or WIFI network. ZDRK8812CU helps multi-media
device achieve to send & receive data package in a wireless way.
2.2 Feature
●IEEE standard:IEEE 802.11a/b/g/n/ac
●operating Frequency 2.4GHz/5 GHz
●support up to 867Mbps
● 2T2R mode
●Support 20MHz, 40MHz, 80MHz in 5GHz band, and 20MHz, 40MHz band width in 2.4GHz band.
●support USB 2.0 high data rate mode,10-pin interface
●support WFA/ WPA/WPA2 /WPS2.0/WAPI security
●RoH
●MAC /baseband/RF: RTL8812CU