Installation & Operation Guide

Page 09

OPERATION INSTRUCTIONS

Exterior Assembly Overview

Green

• Indicates Successful Programming Step

• Indicates Unlocking is Successful

Red

• Indicates Failed Programming Step

• Indicates Locking is Successful

Electronic lock requires (4) High Quality

AA Alkaline batteries. When all 4 batteries

are installed in the correct position, hear 2

beeps and the keypad will illuminate blue.

DO NOT TOUCH the keypad until the keypad

stops illuminating.

Lock - Used to lock door

Clear - Used to clear wrong keypad entries

Unlock - Used to unlock door

Programming - Used in programming steps

5 Seconds - Complete all the programming steps in the programming mode within 5 seconds.

Clear - Use the key to clear entries in case a wrong button is pushed.

Lock button

Unlock button

Factory Settings

The lock comes factory preset with a:

Please change the Programming

Code and the User Code

as soon as possible after installation

to insure security.

Programming code - 123456

User code - 123456

User ID - 01

Batteries (not included)

Programming Symbols

Lock / Clear

Unlock / Programming

Programming Code

User Code (4-9 digits)

User ID (01-50, 2 digits)

Programming Tips