Installation & Operation Guide

Page 10

LOCKING/UNLOCKING/PASSWORD PROGRAMMING

TO UNLOCK THE LOCK

Using Keypad: Enter a valid User Code (default code is 123456) and press and hear

1 beep and lights green.

TO LOCK THE LOCK

Using Keypad: Press and then hear 2 beeps and lights red.

CHANGE CURRENT OR PRESE T PROGRAMING CODE

Factory default Programming Code = 123456, this is the master password for

your lock. All programming functions require this code. Follow the below sequence to

change the Programming Code

to your custom 6 digit combination.

TO ADD A NEW USER CODE (you can add up to 50 new user codes)

The User Code must be a 4-9 digit combination. Each User Code is then linked

to a User ID (which is any number between 01-50) to identify an individual User

Code . (User ID 1-9 should be entered a

s 01-09 so they are 2 digits).

Hear 1 beep and Light Indicator illuminates green.

NOTE:When a New Programing Code is set ,

The default factory User Code is deleted directly.

4 new Re-enter

1 Re-enter

Changing Programming Code

Adding User Codes

UC UC

PC PC