Installation & Operation Guide

Page 11

DELETE ONE EXISTING OR PRESET USER CODE

The unit comes with a factory User ID = 01 for User Code = 123456.

IMPORTANT: To delete 1 User Code , the lock must have more than 1 User Code

in its database.

SET OR CANCEL AUTO LOCK

You can set the lock to automatically close after each time the lock is opened. Time

value range = 3-30

Default is 10 seconds,

seconds, enter the following:

You can “mute” or turn the “sound on” on your lock by entering the following.

(Factory setting is sound on).

DELETE ALL USER CODES

IMPORTANT: this will delete the user codes but not the programming code, enter

the following.

Hear 1 beep and Light Indicator illuminates green.

Set Auto Lock:

Hear 1 beep and Light Indicator illuminates green.

Sound Off (1) - Light Indicator

illuminates green.

Sound On (2) - Hear 1 beep and Light Indicator illuminates green.

To cancel Auto Lock set the time to 00, enter the following:

Cancel Time Value Auto Lock:

Hear 1 beep and Light Indicator illuminates green.

2 Existing

re-enter

5 Time Value

6 1 or 2

5 00

3 re-enter

Automatic Lock Function

Sound On and Off

PC PC

ID ID

1 = Sound Off

2 = Sound On