Specifications

qingping Temp & RH Monitor Lite

Green Ping Bluetooth hygrometer Lite can detect the ambient

temperature and humidity, display the reading on the screen, and

transmit it to the mobile phone or gateway through Bluetooth;

with wall stickers and desktop brackets.

Specification

Model:CGDK2

Weight:43 g（Excluding wall stickers and desktop supports）

Size:60.5*60.5*13.5mm（Excluding wall stickers and desktop

supports）

Screen size:Φ50mm(visible area)

Temperature range:-9.9～50°C

Humidity range:0～99.9%

Wireless Connectivity: Bluetooth 5.0

Battery Type:CR2430 button cell

CMIIT ID:XXXXXXXXXX

Manufacturer: Qingping Technology (Beijing) Co., Ltd.

Address: Room 401, Block B, Fangheng Times Square, No.10

Wangjing Street, Chaoyang District, Beijing 100102, China

Installation:

1. Open the battery cover on the back of the main body, put a

cr2430 battery in the direction indicated, and replace the

battery cover;

2. Paste the wall sticker on the plane in the space where you

want to test the ambient temperature and humidity, such as the

wall, and then attach the main body to the wall sticker; or

attach the desktop bracket to the back of the main body, and

then place the product on the desktop.

After installation, you can receive the temperature and humidity

readings through the specified mobile app. If you want to

receive notifications remotely, view historical data, and set up

linkage with other devices, you need to be equipped with a

matching gateway.

PAGE 1
qingping Temp & RH Monitor Lite Green Ping Bluetooth hygrometer Lite can detect the ambient temperature and humidity, display the reading on the screen, and transmit it to the mobile phone or gateway through Bluetooth; with wall stickers and desktop brackets. Specification Model:CGDK2 Weight:43 g（Excluding wall stickers and desktop supports） Size:60.5*60.5*13.5mm（Excluding wall stickers and desktop supports） Screen size:Φ50mm(visible area) Temperature range:-9.9～50°C Humidity range:0～99.
PAGE 2
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.