User's Manual
Table Of Contents
- 1 Read This First
- 2 Safety Information
- 3 Overview
- 4 Preparing the System
- Inserting a microSD Card
- Using the Stand
- Charging the System
- Connecting the Transducer
- Removing the Transducer
- Using the System On The Go
- Using the Wheel Brakes
- Placing the Transducer Holder
- Mounting the System to the System Cart
- Adjusting the System Cart Height
- Connecting an External Printer
- Tilting the System
- Unmounting the System From the System Cart
- Moving the System
- Outputting the System Display to an HDMI-Enabled TV or Monitor
- Supported External Printers
- 5 Using the System
- Turning On/Off the System
- Logging Into the System
- Launching the Main Screen
- Setting the System Time and Date
- Controlling the System
- Setting the System Language
- Identifying the Main Screen Layout
- Switching the Control Panel Pages
- Managing the System Power
- Managing Disk Space
- Network Configuration
- DICOM Configuration
- 6 Performing an Exam
- Starting a New Exam
- Adding a New Patient
- Loading a Worklist
- Selecting a Preset
- Setting the Transducer Orientation
- Selecting/Switching a Scan Mode
- Adjusting the Displayed Image
- Freezing an Image
- Adding Annotations
- Adding Measurements
- Saving and Printing the Image
- Reviewing the Image
- Exporting the Exam
- Managing the Exam List
- Ending the Exam
- 7 Using Image Controls
- 2D Mode Image Controls
- Overview
- Adjusting Gain
- Adjusting Frequency
- Adjusting Time Gain Compensation (TGC)
- Adjusting the Scan Depth
- Adjusting the Focus Depth, Focal Zone and Focal span
- Adjusting Dynamic Range
- Using Tissue Harmonic Imaging (THI)
- Adjusting Persistence
- Adjusting Sharpness and Smoothing
- Adjusting Gray Map
- Adjusting Chroma Map
- Adjusting Steer Angle
- Adjusting the Sector Width and Position
- Adjusting Power
- Using Trapezoidal Imaging
- Adjusting Density
- Using Compound Imaging
- Using ENV (Enhanced Needle Visualization)
- Color/CPA Mode Image Controls
- M-Mode Image Controls
- Spectral Doppler Mode Image Controls
- 2D Mode Image Controls
- 8 System Customization and Service
- Customizing Your System
- Configuring Security Policies
- Servicing your system
- Reinstalling Software
- Checking the Software Version
- Checking the System’s Serial Number
- Checking the Tablet’s Serial Number
- Checking the License Status
- Resetting User Settings
- Backing Up System Settings and Patient Data
- Restoring System Settings and Patient Data
- Resetting Your System
- Testing the System
- Exporting System Logs
- Reading the User Manual
- 9 Transducers
- 10 Transducer Care
- 11 System Maintenance
- 12 Appendix
InnoSight Ultrasound System
M-Mode Image Controls
inen
94
P6992-4, EN, 16/12/6
Inverting the Color Display
Invert the color display in relation to the blood flow direction in Color mode Normally, the color red
is assigned to positive frequency shifts (flow toward the transducer), and blue is assigned to negative
frequency shifts (flow away from the transducer) Use this function to reverse this color assignment and
invert the colors on the color wedge
Touch Invert to invert the color scale
Using Directional Power
Activate Directional Power in CPA mode for use in applications where sensitivity and directional information
are both required
Touch Directional to enable this function
M-Mode Image Controls
Overview
M-Mode imaging is used simultaneously with 2-dimensional (2D mode) imaging to determine patterns
of motion for objects within the ultrasound beam M-Mode displays scan data of the anatomy in the 2D
Imaging window
a
, and the motion scan in the Time Series window
b
The M-Mode cursor line (M-line)
appears vertically in the central area of the active 2D image, indicating the position of the M-Mode beam
Typically, this mode is used for viewing motion patterns of the heart
Drag the M-line to the target position to determine the presence of motion occurred along the singular line
2D PW
M CW
0
Zoom
5
TGC
2D M
2D
M
1
b
a
2
1
Figure 37M-Mode real-time scan
1
Touch Update to initiate the M-Mode trace which produces a scrolling display of
movement (along the vertical Y axis), plotted against time (along the horizontal axis)
2
Touch M to enable M-Mode image controls