User's Manual
Table Of Contents
- 1 Read This First
- 2 Safety Information
- 3 Overview
- 4 Preparing the System
- Inserting a microSD Card
- Using the Stand
- Charging the System
- Connecting the Transducer
- Removing the Transducer
- Using the System On The Go
- Using the Wheel Brakes
- Placing the Transducer Holder
- Mounting the System to the System Cart
- Adjusting the System Cart Height
- Connecting an External Printer
- Tilting the System
- Unmounting the System From the System Cart
- Moving the System
- Outputting the System Display to an HDMI-Enabled TV or Monitor
- Supported External Printers
- 5 Using the System
- Turning On/Off the System
- Logging Into the System
- Launching the Main Screen
- Setting the System Time and Date
- Controlling the System
- Setting the System Language
- Identifying the Main Screen Layout
- Switching the Control Panel Pages
- Managing the System Power
- Managing Disk Space
- Network Configuration
- DICOM Configuration
- 6 Performing an Exam
- Starting a New Exam
- Adding a New Patient
- Loading a Worklist
- Selecting a Preset
- Setting the Transducer Orientation
- Selecting/Switching a Scan Mode
- Adjusting the Displayed Image
- Freezing an Image
- Adding Annotations
- Adding Measurements
- Saving and Printing the Image
- Reviewing the Image
- Exporting the Exam
- Managing the Exam List
- Ending the Exam
- 7 Using Image Controls
- 2D Mode Image Controls
- Overview
- Adjusting Gain
- Adjusting Frequency
- Adjusting Time Gain Compensation (TGC)
- Adjusting the Scan Depth
- Adjusting the Focus Depth, Focal Zone and Focal span
- Adjusting Dynamic Range
- Using Tissue Harmonic Imaging (THI)
- Adjusting Persistence
- Adjusting Sharpness and Smoothing
- Adjusting Gray Map
- Adjusting Chroma Map
- Adjusting Steer Angle
- Adjusting the Sector Width and Position
- Adjusting Power
- Using Trapezoidal Imaging
- Adjusting Density
- Using Compound Imaging
- Using ENV (Enhanced Needle Visualization)
- Color/CPA Mode Image Controls
- M-Mode Image Controls
- Spectral Doppler Mode Image Controls
- 2D Mode Image Controls
- 8 System Customization and Service
- Customizing Your System
- Configuring Security Policies
- Servicing your system
- Reinstalling Software
- Checking the Software Version
- Checking the System’s Serial Number
- Checking the Tablet’s Serial Number
- Checking the License Status
- Resetting User Settings
- Backing Up System Settings and Patient Data
- Restoring System Settings and Patient Data
- Resetting Your System
- Testing the System
- Exporting System Logs
- Reading the User Manual
- 9 Transducers
- 10 Transducer Care
- 11 System Maintenance
- 12 Appendix
11
2 enin
Symbols
InnoSight Ultrasound System
P6992-4, EN, 16/12/6
Symbols Descriptions
SVC
Philips Service Code
UDI
Unique Device Identification
Manufacturer Mark
Manufacturer
Qisda Corporation manufactures the system
201X-XX-XX
Manufacture Date
EU/EC European Authorized Representative
0120
CE Marking Certification with Notified Body Number 0120
Compliance to R&TTE Directive
710435
Notify Body Certificate
Final Disposal of Your System
Final disposal is when you dispose of the system in such a way that it can no longer be
used for its intended purposes
For more information, see Recycling, Reuse, and Disposal on page 3
Refer to the User Manual
Indicates that the user should read the
User Manual
for information on using this
equipment
Operating instructions
Indicates that the user should see the instructions for use for safety information
Identifies ESD (electrostatic-discharge) sensitivity of a connector that is not tested as
specified in IEC 661-1-2 Do not touch exposed connector pins Touching exposed pins
can cause electrostatic discharge, which can damage the product
Type BF Equipment Applied Part
The Ultrasound System provides protection against electric shock
Include RF transmitters, apply RF electromagnetic energy for diagnosis
Tablet IP Code, International Protection Marking
System Button
Symbols Descriptions
Power button
Press and hold the Power button to turn on/off the system