User's Manual
Table Of Contents
- 1 Read This First
- 2 Safety Information
- 3 Overview
- 4 Preparing the System
- Inserting a microSD Card
- Using the Stand
- Charging the System
- Connecting the Transducer
- Removing the Transducer
- Using the System On The Go
- Using the Wheel Brakes
- Placing the Transducer Holder
- Mounting the System to the System Cart
- Adjusting the System Cart Height
- Connecting an External Printer
- Tilting the System
- Unmounting the System From the System Cart
- Moving the System
- Outputting the System Display to an HDMI-Enabled TV or Monitor
- Supported External Printers
- 5 Using the System
- Turning On/Off the System
- Logging Into the System
- Launching the Main Screen
- Setting the System Time and Date
- Controlling the System
- Setting the System Language
- Identifying the Main Screen Layout
- Switching the Control Panel Pages
- Managing the System Power
- Managing Disk Space
- Network Configuration
- DICOM Configuration
- 6 Performing an Exam
- Starting a New Exam
- Adding a New Patient
- Loading a Worklist
- Selecting a Preset
- Setting the Transducer Orientation
- Selecting/Switching a Scan Mode
- Adjusting the Displayed Image
- Freezing an Image
- Adding Annotations
- Adding Measurements
- Saving and Printing the Image
- Reviewing the Image
- Exporting the Exam
- Managing the Exam List
- Ending the Exam
- 7 Using Image Controls
- 2D Mode Image Controls
- Overview
- Adjusting Gain
- Adjusting Frequency
- Adjusting Time Gain Compensation (TGC)
- Adjusting the Scan Depth
- Adjusting the Focus Depth, Focal Zone and Focal span
- Adjusting Dynamic Range
- Using Tissue Harmonic Imaging (THI)
- Adjusting Persistence
- Adjusting Sharpness and Smoothing
- Adjusting Gray Map
- Adjusting Chroma Map
- Adjusting Steer Angle
- Adjusting the Sector Width and Position
- Adjusting Power
- Using Trapezoidal Imaging
- Adjusting Density
- Using Compound Imaging
- Using ENV (Enhanced Needle Visualization)
- Color/CPA Mode Image Controls
- M-Mode Image Controls
- Spectral Doppler Mode Image Controls
- 2D Mode Image Controls
- 8 System Customization and Service
- Customizing Your System
- Configuring Security Policies
- Servicing your system
- Reinstalling Software
- Checking the Software Version
- Checking the System’s Serial Number
- Checking the Tablet’s Serial Number
- Checking the License Status
- Resetting User Settings
- Backing Up System Settings and Patient Data
- Restoring System Settings and Patient Data
- Resetting Your System
- Testing the System
- Exporting System Logs
- Reading the User Manual
- 9 Transducers
- 10 Transducer Care
- 11 System Maintenance
- 12 Appendix
23
2 enin
Waterproof and Dustproof Ratings
InnoSight Ultrasound System
P6992-4, EN, 16/12/6
Position the disposable drape so that it does not block the vents on the system, the monitors, or
the peripherals
Waterproof and Dustproof Ratings
The system has a degree of protection from ingress of water and particulate matter, but the tablet is not
approved for use where it would be exposed to liquids If it is used in environments where it might be
exposed to liquids, the tablet must be covered by a drape, such as a Civco 66-16 These environments
include, but are not limited to, outpatient and private office procedures such as biopsies, office visits, and
other traditional, non-invasive scanning
The following table lists the applied parts and their levels of protection
Component Use IP level
Ultrasound System Ultrasound system IP22
C6-2 transducer Ultrasound transducer IP (at transducer head)
L12-4 transducer Ultrasound transducer IP (at transducer head)
S4-2 transducer Ultrasound transducer IP (at transducer head)
C9-4v transducer Ultrasound transducer IP (at transducer head)
Tale 3Waterproof and dustproof ratings
Understanding the MI/TI Display
The system allows full software control of acoustic output When powering on the system or creating a new
exam, scan parameters should be set to default preset All of the default presets are compliant with FDA
requirements TI/MI information are displayed in real-time in the scan properties area
2D Color PW
M CPA
Focus8.0
Dyn Range78
THI Full Screen
Dual Toggle
Fn Key iScan TGC Home
2D
Menu
End Exam
Pen Res
Abdomen
12/5/2016 08:56 AM
C6-2
MI 0.72
TIS 0.03
16.0 cm
2D
Gen
Gn 43
DR 78
1/ 0/ 1
1/ 0/ 4
1
5
Figure 2MI/TI on-screen display format
In the following table, the MI or TI index is equal or greater than 1 for transducer/mode combinations
marked V