User's Manual
Table Of Contents
- 1 Read This First
- 2 Safety Information
- 3 Overview
- 4 Preparing the System
- Inserting a microSD Card
- Using the Stand
- Charging the System
- Connecting the Transducer
- Removing the Transducer
- Using the System On The Go
- Using the Wheel Brakes
- Placing the Transducer Holder
- Mounting the System to the System Cart
- Adjusting the System Cart Height
- Connecting an External Printer
- Tilting the System
- Unmounting the System From the System Cart
- Moving the System
- Outputting the System Display to an HDMI-Enabled TV or Monitor
- Supported External Printers
- 5 Using the System
- Turning On/Off the System
- Logging Into the System
- Launching the Main Screen
- Setting the System Time and Date
- Controlling the System
- Setting the System Language
- Identifying the Main Screen Layout
- Switching the Control Panel Pages
- Managing the System Power
- Managing Disk Space
- Network Configuration
- DICOM Configuration
- 6 Performing an Exam
- Starting a New Exam
- Adding a New Patient
- Loading a Worklist
- Selecting a Preset
- Setting the Transducer Orientation
- Selecting/Switching a Scan Mode
- Adjusting the Displayed Image
- Freezing an Image
- Adding Annotations
- Adding Measurements
- Saving and Printing the Image
- Reviewing the Image
- Exporting the Exam
- Managing the Exam List
- Ending the Exam
- 7 Using Image Controls
- 2D Mode Image Controls
- Overview
- Adjusting Gain
- Adjusting Frequency
- Adjusting Time Gain Compensation (TGC)
- Adjusting the Scan Depth
- Adjusting the Focus Depth, Focal Zone and Focal span
- Adjusting Dynamic Range
- Using Tissue Harmonic Imaging (THI)
- Adjusting Persistence
- Adjusting Sharpness and Smoothing
- Adjusting Gray Map
- Adjusting Chroma Map
- Adjusting Steer Angle
- Adjusting the Sector Width and Position
- Adjusting Power
- Using Trapezoidal Imaging
- Adjusting Density
- Using Compound Imaging
- Using ENV (Enhanced Needle Visualization)
- Color/CPA Mode Image Controls
- M-Mode Image Controls
- Spectral Doppler Mode Image Controls
- 2D Mode Image Controls
- 8 System Customization and Service
- Customizing Your System
- Configuring Security Policies
- Servicing your system
- Reinstalling Software
- Checking the Software Version
- Checking the System’s Serial Number
- Checking the Tablet’s Serial Number
- Checking the License Status
- Resetting User Settings
- Backing Up System Settings and Patient Data
- Restoring System Settings and Patient Data
- Resetting Your System
- Testing the System
- Exporting System Logs
- Reading the User Manual
- 9 Transducers
- 10 Transducer Care
- 11 System Maintenance
- 12 Appendix
InnoSight Ultrasound System
Logging Into the System
inee
52
P6992-4, EN, 16/12/6
Creating a New Administrator Account
1 After system startup, the default user account with administrative privileges appears on the screen To
begin the first-time-logging-in process, touch the account name, enter the default password and touch
Login
Default User ID: SiteAdmin
Default Password: System’s serial number
To check your system’s serial number:
On the system imaging screen, touch Menu > Settings > About
Refer to the system label on the back of the system
Each time after a fresh installation or restoring the system to its factory state, the system
requires logging in using the default site administrator credentials
2 Enter your personal credentials to create a new site administrator account, and touch OK The default
site administrator account will then be deleted automatically
Logging into the administrator account enables full access to complete safety settings, but not
operations To perform exams and functions, the user logged in needs to be a registered user
To enable this role, check Registered User
3 Follow the instructions in each section to set up the security policies (See page 12) Touch Save to
save the settings
If you choose to start the system as a guest, only restricted operations can be performed To
return to the user login screen at any time, touch Menu > Security > Go to Login Screen
Adding a New User Account
Continue logged in as the administrator to have access to adding new users
1 Touch Menu > User Management
2 Touch Add User Enter personal credentials to create a new user account, and touch OK
If you wish to enable this user as a second administrator with access to security settings, check
Site Administrator
3 The user account is added with default security policies To add more users, repeat step 1-2
To protect user security, the next time the operator logs in as the new user, he or she is required
to change the password
Switching Users
If you are on the user settings screen, touch first to log off current user and enter the user
login screen
On the user login screen, touch the desired user from the user list on the left, the selected user with its user
ID appears on the right Touch
, enter the password and touch Login