User's Manual
Table Of Contents
- 1 Read This First
- 2 Safety Information
- 3 Overview
- 4 Preparing the System
- Inserting a microSD Card
- Using the Stand
- Charging the System
- Connecting the Transducer
- Removing the Transducer
- Using the System On The Go
- Using the Wheel Brakes
- Placing the Transducer Holder
- Mounting the System to the System Cart
- Adjusting the System Cart Height
- Connecting an External Printer
- Tilting the System
- Unmounting the System From the System Cart
- Moving the System
- Outputting the System Display to an HDMI-Enabled TV or Monitor
- Supported External Printers
- 5 Using the System
- Turning On/Off the System
- Logging Into the System
- Launching the Main Screen
- Setting the System Time and Date
- Controlling the System
- Setting the System Language
- Identifying the Main Screen Layout
- Switching the Control Panel Pages
- Managing the System Power
- Managing Disk Space
- Network Configuration
- DICOM Configuration
- 6 Performing an Exam
- Starting a New Exam
- Adding a New Patient
- Loading a Worklist
- Selecting a Preset
- Setting the Transducer Orientation
- Selecting/Switching a Scan Mode
- Adjusting the Displayed Image
- Freezing an Image
- Adding Annotations
- Adding Measurements
- Saving and Printing the Image
- Reviewing the Image
- Exporting the Exam
- Managing the Exam List
- Ending the Exam
- 7 Using Image Controls
- 2D Mode Image Controls
- Overview
- Adjusting Gain
- Adjusting Frequency
- Adjusting Time Gain Compensation (TGC)
- Adjusting the Scan Depth
- Adjusting the Focus Depth, Focal Zone and Focal span
- Adjusting Dynamic Range
- Using Tissue Harmonic Imaging (THI)
- Adjusting Persistence
- Adjusting Sharpness and Smoothing
- Adjusting Gray Map
- Adjusting Chroma Map
- Adjusting Steer Angle
- Adjusting the Sector Width and Position
- Adjusting Power
- Using Trapezoidal Imaging
- Adjusting Density
- Using Compound Imaging
- Using ENV (Enhanced Needle Visualization)
- Color/CPA Mode Image Controls
- M-Mode Image Controls
- Spectral Doppler Mode Image Controls
- 2D Mode Image Controls
- 8 System Customization and Service
- Customizing Your System
- Configuring Security Policies
- Servicing your system
- Reinstalling Software
- Checking the Software Version
- Checking the System’s Serial Number
- Checking the Tablet’s Serial Number
- Checking the License Status
- Resetting User Settings
- Backing Up System Settings and Patient Data
- Restoring System Settings and Patient Data
- Resetting Your System
- Testing the System
- Exporting System Logs
- Reading the User Manual
- 9 Transducers
- 10 Transducer Care
- 11 System Maintenance
- 12 Appendix
75
einnx
Adjusting the Displayed Image
InnoSight Ultrasound System
P6992-4, EN, 16/12/6
When in 2D Mode:
On the imaging screen, touch Dual The system immediately freezes the current scan, and copies the
current settings for the image to the second screen Two yellow bars will be added to the top/bottom of the
currently active screen To toggle between screens, touch Toggle Only one screen can be active at a time
2D Color PW
M CPA
Focus8.0
Dyn Range78
THI Full Screen
Dual Toggle
Freeze Acquire
Fn Key iScan TGC Home
2D
Menu
End Exam
Pen Res
Abdomen
12/5/2016 08:56 AM
33
C6-2
MI 0.72
TIS 0.02
32 Hz
16.0 cm
2D
Gen
Gn 44
DR 78
1/ 0/ 1
3/ 0/ 6
5
Figure 21Dual screen: Frozen 2D mode (left) Real-time 2D mode (right) images
You can compare then apply any image control settings and use scan modes independently to either screen
For example, you can acquire a 2D scan, activate dual screen, then acquire a Color scan in the second
screen
When in 2DColor or 2DCPA Mode:
On the imaging screen, touch Dual The system copies the current settings for the image to the second
screen in 2D mode Both screens are in real-time but you get a clearer view under the ROI in 2D mode
2D Color PW
M CPA
Scale
Steer
Invert Full Screen
Dual Toggle
Freeze Acquire
Fn Key iScan TGC Home
2D Color
Menu
End Exam
Pen Res
Renal
12/5/2016 08:56 AM
C6-2
MI 0.89
TIS 0.16
13 Hz
16.0 cm
2D
Gen
Gn 44
Color
Gen
Gn 45
2/ 1/ 5
Filter 20.0Hz
33
15
-15
5
cm/s
Figure 22Dual screen: Real-time 2D mode (left) Real-time 2DColor mode (right) images
Touching Dual again freezes the 2D real-time scan and turns it into a frozen 2DColor or 2DCPA mode
image
To leave the dual screen, touch Dual
To enable dual screen when the scan is frozen, touch Compare