User's Manual
Table Of Contents
- 1 Read This First
- 2 Safety Information
- 3 Overview
- 4 Preparing the System
- Inserting a microSD Card
- Using the Stand
- Charging the System
- Connecting the Transducer
- Removing the Transducer
- Using the System On The Go
- Using the Wheel Brakes
- Placing the Transducer Holder
- Mounting the System to the System Cart
- Adjusting the System Cart Height
- Connecting an External Printer
- Tilting the System
- Unmounting the System From the System Cart
- Moving the System
- Outputting the System Display to an HDMI-Enabled TV or Monitor
- Supported External Printers
- 5 Using the System
- Turning On/Off the System
- Logging Into the System
- Launching the Main Screen
- Setting the System Time and Date
- Controlling the System
- Setting the System Language
- Identifying the Main Screen Layout
- Switching the Control Panel Pages
- Managing the System Power
- Managing Disk Space
- Network Configuration
- DICOM Configuration
- 6 Performing an Exam
- Starting a New Exam
- Adding a New Patient
- Loading a Worklist
- Selecting a Preset
- Setting the Transducer Orientation
- Selecting/Switching a Scan Mode
- Adjusting the Displayed Image
- Freezing an Image
- Adding Annotations
- Adding Measurements
- Saving and Printing the Image
- Reviewing the Image
- Exporting the Exam
- Managing the Exam List
- Ending the Exam
- 7 Using Image Controls
- 2D Mode Image Controls
- Overview
- Adjusting Gain
- Adjusting Frequency
- Adjusting Time Gain Compensation (TGC)
- Adjusting the Scan Depth
- Adjusting the Focus Depth, Focal Zone and Focal span
- Adjusting Dynamic Range
- Using Tissue Harmonic Imaging (THI)
- Adjusting Persistence
- Adjusting Sharpness and Smoothing
- Adjusting Gray Map
- Adjusting Chroma Map
- Adjusting Steer Angle
- Adjusting the Sector Width and Position
- Adjusting Power
- Using Trapezoidal Imaging
- Adjusting Density
- Using Compound Imaging
- Using ENV (Enhanced Needle Visualization)
- Color/CPA Mode Image Controls
- M-Mode Image Controls
- Spectral Doppler Mode Image Controls
- 2D Mode Image Controls
- 8 System Customization and Service
- Customizing Your System
- Configuring Security Policies
- Servicing your system
- Reinstalling Software
- Checking the Software Version
- Checking the System’s Serial Number
- Checking the Tablet’s Serial Number
- Checking the License Status
- Resetting User Settings
- Backing Up System Settings and Patient Data
- Restoring System Settings and Patient Data
- Resetting Your System
- Testing the System
- Exporting System Logs
- Reading the User Manual
- 9 Transducers
- 10 Transducer Care
- 11 System Maintenance
- 12 Appendix
1
1 edii
Intended Audience
1
P6992-4, EN, 16/12/6
1
Read This First
The InnoSight Diagnostic Ultrasound System (hereinafter called system) is an easy-to-use, portable
ultrasound imaging instrument intended for use by a qualified operator for ultrasound evaluation and
clinical analysis
The
User Manual
provides important procedures and information on how to operate the system and
service the system correctly and safely Before attempting to operate the system, read this manual and
strictly observe all warnings and cautions Pay extra attention to the information from Chapter 2 Safety
Information
This manual aims to provide the most updated and accurate information to customers and thus all contents
may be modified from time to time without prior notice No part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval system or translated into any language or computer language,
in any form or by any means, electronic, mechanical, magnetic, optical, chemical or manual We make
no representations or warranties, either expressed or implied, with respect to the contents hereof and
specifically disclaims any warranties, merchantability or fitness for any particular purpose Further, we
reserve the right to revise this publication and to make changes from time to time in the contents hereof
without obligation to notify any person of such revision or changes
Chroma, Color Power Angio, High Q, SonoCT, and RES are trademarks of oninklijke Philips NV
Non-Philips product names may be trademarks of their respective owners
Distributed by Philips Ultrasound, Inc.
221 Bothell Everett Hwy, Bothell, WA 921-431 USA
Manufactured by Qisda Corporation
No1, Shan-Ying Road, Shan-Ting Li, Gueishan Dist, Taoyuan City, Taiwan, ROC
Intended Audience
This document is intended for sonographers, physicians, and biomedical engineers who operate and
maintain the system and are familiar with ultrasound techniques
Intended Use
The system is designed for use as a diagnostic ultrasound imaging tool and fluid flow analysis of the human
body The system shall provide the ability for gathering clinically acceptable images and ultrasound data for
the clinical applications and anatomies The clinical environments where the system can be used include
clinics, hospitals, and clinical point-of-care for diagnosis of patients
The system is intended to be installed, used, and operated only in accordance with the safety procedures
and operating instructions given in the system user information, and only for the purposes for which it was
designed
The system should only be operated by someone who has received proper training in the use and operation
of an ultrasound system This system produces images derived from sound echoes those images must be
interpreted by a qualified medical professional This system in no way interprets these images or provides a
medical diagnosis of the patient being examined