User's Manual

To open the device control panel:
1.
If you have not already done so, add the device you want to use (see AddaBluetoothEnabledDevice).
2.
Double-click the Bluetooth icon in the taskbar notification area.
3.
Double-click the icon for the device, or right-click the icon and select Control.
The operations that you can perform with a specific Bluetooth enabled device are listed under Device
Operations. These operations correspond with the services that the device provides.
NOTE: Because of corporate security policies, some expected operations might not be available
because the corresponding device services have been disabled by the IT administrator. Contact
your IT administrator for more information or if you have any questions.
A Connect button is provided for those operations in which it is desirable for the connection to persist
until you decide to disconnect. When the connection is made, a green check mark is displayed next to
the Bluetooth icon image, the label on the button changes to Disconnect, and the description of the
operation changes to indicate the reverse of what was originally stated.
Under Settings, you can view and change the settings that control the interaction between the device
and your computer. These vary depending on the Bluetooth device type.
The following illustration shows the control panel for a Bluetooth enabled computer.