User's Manual

Professional

FM Transceiver

Transmitting

Before transmitting, make sure that the channel you want to use is not in busy state through monitoring

for a while by pressing the programmed Squelch off [PF1] / [PF2] key. Under these conditions, press

the [PTT] key and speak into microphone. Please keep around 2.5-5cm distance between microphone

and your lip. And please speak in normal tone to make the receiver obtain best tone quality.

ON/OFF VOX

When turn on this function, it's not necessary to press the [PTT], through the appropriate voice can

star emission.

In standby, put HS03 earphone into MIC-SPK, press and hold [PF1] more than 3 seconds, the

transceiver will send a prompt voice and turn on VOX function. Repeat the above operation or restart

will be closed the VOX function.

NOTE: It needs to program the VOX in valid status firstly if you want to turn on this function,

otherwise, the above operation is invalid.

Note:Press [PTT] Red LED lighting means transmitting. Release [PTT] to receive signal.

BASIC OPERATIONS