User's Manual

28
Display Mode Setup
There are three kinds of display modes for optional.
1. Press [PF2] key to turn on radio, hold [PF2] key until transceiver emits beep.
2. Press
/ key to choose No. 01 function item, it shows "DSP" on LCD.
3. Rotate channel switch to choose desired setup.
FREQ: Frequency + Channel mode, transceiver displays current channel name
+ frequency, press
key to switch into VFO mode.
CH: Channel mode, 1~21 items of function menu will hide automatically, user can
only operate some functions. It is unable to switch into VFO by pressing
key. This model can be used for Amateur mode.
NAME: Channel + Name Tag mode, transceiver displays current channel number
+ channel name, press
key to switch into VFO mode.
4. Press
key or key to con rm and exit.
FUNCTION MENU SETUP
Resume Factory Default
You can make all the settings of transceiver return to the factory default settings when transceiver can not
work normally because of wrong operation or error setup.
1. Press [PF2] key to turn on radio, hold [PF2] key until transceiver emits beep.
2. Press
/ key to choose No. 02 function item, it shows "RESTOR" on LCD.
3. Rotate channel switch to choose desired setup.