User's Manual

15
7
Shortcut Operations
CTCSS SCAN
Repeatedly press
key until LCD
displays
and icons ,then hold
key for 1S to enter into CTCSS scanning.
2QFH¿QGLQJDPDWFKLQJ&7&66VLJQDOLQJLW
will stop for 15s then scan again.
Under channel mode,this operation can be temporarily used by user. Once
the radio is turned off or switched to another channel,the temporary setting
will be erased.
When LCD appears
3.
iron, it means current channe can be set
with DCS encode and decode together, turn selector knob or press
Microphone's [
/ ] to select desired DCS encode and
decode.
CTCSS:62.5-254.1, Total 51groups; DCS:000N-777I total 1024
4.
groups. N is positive code, , is inverse code.
Press any key except
5.
, and keys to return into
standby status.
Repeatedly press
key until LCD
displays DCS icons ,then hold key for
6WRHQWHULQWR'&6VFDQQLQJ2QFH¿QGLQJ
a matching DCS signaling ,it will stop for 15s
then scan again.
compander function.
Press
key until LCD display iron,
then press key to switch be
low power. The LCD appears:
: Transmit in low power
Compander function will decrease the background noise and enhance
audio clarity, especially in long range communication.
Press
1.
key, then press key to
turn on compander function, repeat
above operation again to turn off
Power
Compander (Decrease the background noise and ENHANCE
AUDIO CLARITY)
When LCD appears
2.
iron, enable
compander in current channel.
When LCD doesn't display
3.
iron,
disable compander in current channel.
DCS SCAN