User's Manual

26
7
General Setting
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No36 menu. The LCD displays "SHIFT"
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted value.
4.
Available Offset frequency for this transceiver is 0-100MHz.
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No37 menu. The LCD displays "DISPLAY"
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted value.
4.
FREQ: The radio displays channel number
+ frequency in channel mode, if
press key,it will change to
VFO mode.
CH:
D
isplays only channel number.
NAME:
In channel mode, It displays the
channel number and channel name if the current channel is
programmed with a name. Otherwise, it display the channel number
and frequency.If press
key, it will change to VFO mode.
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.
OFFSET FREQUENCY SETUP
DISPLAY MODE SETUP
Before using Priority channel scan function.the edited channel shall be
programmed as "P SCAN" or refer to the PRI instrunction in page 29 to
add or delete priority channel.
NOTE
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No35 menu. The LCD displays "SCAN M"
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted value.
4.
MEN: Channel Scan, the transceiver will scan all the channels after
enter channel scan.
MSN: Priority Channel Scan, the
transceiver will only scan the priority channel after enter channel
scan.
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.
PRIORITY CHANNEL SCAN
Switch the Main band selector knob to
4.
choose wanted value.
TIME: it pauses 5s once scanning a matching signal, then resume scan.
BUSY: it pauses once scanning a matching signal, then resume scan
after the signal disappeared for 2 seconds.
SECEDE: It Stops once scanning a matching signal, and exit scan.
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.