User's Manual

29
The transceiver offers enquiry of calling record.
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No. 49 menu. The LCD displays "NOTE"
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted value.
4.
This transceiver is able to record 16 calling at most.
Press the Main band selector knob or
5.
key to store value and back to function
menu. Press key or hold selector
knob for over 0.5 second to store setup and exit.
CALLING RECORD
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No. 50 menu. The LCD displays "AM"
AM FUNCTION
This function is only valid when the Main band frequency is VHF 108-
180MHz, the function is invalid when the right band is set as Main band.
NOTE
AUTOMATIC AM FUNCTION
To enable Automatic AM function, the AM function shall be turned on rst.
The radio will automatically boot AM function when the VHF frequency
is under 136Mhz
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No. 51 menu. The LCD displays "AUT AM"
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted value.
4.
ON: turn on auto AM function.
OFF: turn off auto AM function.
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.
NOTE
7
General Setting
Press the Main band selector knob to enter
3.
function setup.
Switch the Main band selector knob to
4.
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No. 48 menu. The LCD displays
"DIMMER"
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted value.
4.
Available value: 32 brightness levels.
Press the Main band selector knob or
5.
key to store value and back to
function menu. Press key or hold
selector knob for over 0.5 second to store setup and exit.
choose wanted value.
ON: turn on AM function. OFF: turn off AM function.
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.
VHF EXTERNAL SPEAKER PORT
When the function setup as external (EXT), an external Dual Track
speaker (SP-02) must be connected in order to hear the calling on VHF.
The calling from VHF and UHF are separated in 2 tracks.
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No. 52 menu. The LCD displays "VSPCONT"
Press the Main band selector knob to enter function setup.
3.