User's Manual

30
Press
1.
key to enter function menu.
Turn the Main band selector knob to choose
2.
No.56 menu. The LCD displays "PASSWD"
Press the Main band selector knob to enter
3.
function setup.
Switch the Main band selector knob to
4.
choose wanted value.
ON: Turn on password function. OFF: Turn off password function.
Press the Main
5.
band selector knob or key to store value and
back to function menu. Press
key or hold selector knob for over
0.5 second to store setup and exit.
PASSWORD FUNCTION
TALK AROUND
MICROPHONE SPEAKER
When password function is on, correct password shall be input after power
on. The password shall be programmed before using this function.
7
General Setting
NOTE
BEEP VOLUME CONTROL
1.
Press
key to enter function menu.
2.
Turn the Main band selector knob to choose No. 53 menu. The LCD
displays “BP-VOL”
3.
Press the Main band selector knob to enter function setup
4.
Switch the Main band selector knob to
choose wanted value.
LOW: BEEP volume is low.
HIGH: BEEP volume is high.
5.
Press the Main band selector knob or
key to store value and
back to function menu.
Switch the Main band selector knob to choose wanted value.
4.
INT: Internal speaker, VHF and UHF band share one speaker
EXT: External speaker, the calling on VHF is only audible through the
external Dual Track speaker.
Press the Main band selector knob or
5.
key to store value and back to
function menu. Press key or hold selector knob for over 0.5
second to store setup and exit.
1.
Press key to enter function menu.
2.
Turn the Main band selector knob to choose No 55 menu. The LCD
displays “HND SPK”
3.
Press the Main band selector knob to enter function setup.
4.
Switch the Main band selector knob to choose wanted value
HSPKOFF: Turn off microphone speaker.
HSPK ON: Turn on microphone speaker.
MSPKOFF: Turn off Main speaker.
5.
Press the Main band selector knob or
key to store value and back to
function menu.Press
key or hold
selector knob for over 0.5 second to store setup and exit.
With this function on, the transceiver will not able to communicate
with another transceiver through a repeater.
1.
Press key to enter function
menu.
2.
Turn the Main band selector knob
No 54 menu. The LCD displays
“TALK”
3.
Press the Main band selector knob to enter
function setup.
4.
Switch the Main band selector knob to choose wanted value
ON: Turn on Talk Around
OFF: Turn off Talk Around
5.
Press the Main band selector knob or key to store value
and back to function menu.
Press
key or hold selector knob for over 0.5 second to
store setup and exit.